Text preview for : KB0000008.PDF part of Minolta KB0000008 Minolta Copiers Di620 KB0000008.PDF
Back to : KB0000008.PDF | Home
Knowledge Data Base ( KDB No.: KB0000008 / Status: Close )
*** PMN ***
Model:
Di620
Problem Machine:
Di620
Title:
Notes when Print Adaptor KIT is installed
Symptom:
Others / Others(Others)
Symptom Explanation:
Notice:
When Print Adaptor is installed to operate Di620 as MicroPress, the
following work needed to
be done.
1. In case of Unspeed-up respondent machine(before S/No.xx9220)
After "Print adaptor 06211/F KIT #4623-131(for the printer before
speed-up)" is installed
please improve the following program in version.
1) after IC26IB:23G028-00(after P/No.1155-6607-49)
Note 1) It is reported with S/B
No.1155-028C.
2) IC70B:10G055-00
Note 2) It is possible to obtain from SW/FW
Download Service.
3) IC2A:50G019-00
Note 3) IC2A(2) which memories this version
is newly established as market parts.
2. In case of speed-up respondent machine(after S/No.xx9221)
After " Print adaptor 06211/F KIT #4623-132(for the printer after
speed-up)" is installed,
please improve the following program in version.
1) after IC70B:10H004-00(after
P/No.:1155-0756-03)
Note 4) It is reported with S/B
No.1155-040E.
2) IC2A:50H019-00
Note 5) The program of IC2A(3) on the print
board A is changed.
(Change Execution S/No: xx14869~)
Temporary Measure:
CounterMeasure:
Cause:
Problem Rank:
Check
C
Parts Modification Notice:
Ref.No.:
SW/FW Distribution:
Category:
PPC\Digital-B/W
Expand Machine:
Di620(Main Unit)
Di620PE(Main Unit)
Di621(Main Unit)
Cause Area:
Firmware
Original Report:
Information Date:
22.12.99
Edit Date:
22.12.99
Created by:
koji tokuyama/minolta