Text preview for : AE-6D.pdf part of SONY AE-6D Sony AE-6D SERVICE MODE



Back to : AE-6D.pdf | Home

SERVICE MANUAL
MODEL
COMMANDER DEST CHASSIS NO.

AE-6D CHASSIS
MODEL
COMMANDER DEST CHASSIS NO.

KD-32DX100U

RM-933

UK

SCC-Q84B-A

KD-32DX100

RM-933

KD-32NX100/KD-32NS100

RM-935

-1-

SECTION 4 CIRCUIT ADJUSTMENTS
4-1. Electrical Adjustments
Service adjustments to this model can be performed using the supplied remote Commander RM-933 (KD-32DX100U) and RM-935 (KD-32NX100U/ KD-32NS100B). Programming the Remote Commander for Operation in Service Mode 1. Press the VCR/TV/DVD button until the TV LED lights. Press and hold the yellow button for approx. 5 seconds until the TV LED flashes quickly. Model Setting 3. Press 99999. All three LED's should light. The remote commander is now set to Service Mode. To return the remote commander to normal operation mode repeat steps 1. and 2. then press 00000. All three LED's should light. The remote commander is now set to normal mode. Setting the TV into Service Mode 1. Program the remote commander for operation in Service Mode as described above. Turn on the TV main power switch. Press the `VIDEO' button or on the remote commander twice. `TT ' will appear in the upper right corner of the screen. Press the `MENU' button on the remote commander twice to obtain the following menu on the screen.
Service AE6D, Jul 26 2001, v490S3 Initialising Reset Devices Monitoring Device Register Setting Special Adjustment
Model Setting KD-32NX100 KD-32NS100 KD-28DX100 KD-32DX100 Reset

Initialising Menu

Initialising Model Setting Destination Setting Basic Setting Feature Setting

Select :

Next menu :

2.

4.

The menu contains a list with all the available models of this software to set up the TV set in an easy way. The selection of a model is setting data for its features and hardware resources which cannot be detected by the automatic power on H/W detection as well as a special model byte to get an unique model identification for models which cannot be differed by features and hardware resources (e.g. KD-32DX100U and KD-32NX100U). Before data is set, the user will be asked if he really wants to set a new model. If the user agrees, the destination setting menu is automatically shown.

2. 3.

4.

BLACK = No Conformity GREEN = Compatible Model RED = Conformity for all data Select : Last menu : Set Model :

Indication of Model Compatibility. Black:

Select :

Next menu :

If any data does not match to specific model, the model name is displayed in black.
Green:

5. 6. 7.

Move to the corresponding adjustment item using the up or down arrow buttons on the Remote Commander. Press the right arrow button to enter into the required menu item. Press the `Menu' button on the Remote Commander to quit the Service Mode when all adjustments have been completed.

All data which is checked by model setting menu concurs to model except model byte.
Red:

All data which is checked by model setting menu concurs to model including model byte. Note: After selecting a model, it may be necessary to reset some devices to get the correct data. (Treble/Bass Offset of Sound, deflection adjustments, ...)

Note : · Before performing any adjustments ensure that the correct model has been selected in the `Model Setting' menu. · After carrying out the service adjustments, to prevent the customer accessing the `Service Menu' switch the TV set OFF and then ON.

- 24 -

Device Register Setting
Destination Setting Multi A B D E K R U BLACK = No Conformity GREEN = Compatible Model RED = Conformity for all data Select : Last menu : Reset

Device Register Setting Backend Deflection Ext Deflection Dynamic Convergence Colour Decoder 1 Audio / Video Switch Mid - X External PLL Mid - X Gate Array Chip Sound Select :
Set Model :
Audio/Video Switch

Last menu :

Enter Item :

Basic Setting No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Select : Descr Sys.B/G Sys.D/K Sys.L Sys.I (UK) Sys.I (IRL) TXTNat.option 16:9 CRT Sub-woofer Auto stand-by Comb-filter Auto YC det Auto comb det AV2 Available AV3 Available AV4 Available AV3 Fr & rear SECAM Tape AV1 Sound Mute Last menu : Min OFF OFF OFF OFF OFF 1 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF Enter Item : Max ON ON ON ON ON 4 ON ON ON ON ON ON ON ON ON ON ON ON Data ON ON ON ON ON 3 ON ON ON ON ON ON ON ON ON OFF ON OFF

No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Select :

Descr CVOUT1 CVOUT2 GD1 SW GD2 SW YCOUT 1 YCOUT 2 LO0CTRL LO1CTRL AOUT 1 AOUT 2 AOUT 3MUTE ZCD SW AOUT 3 GROUP DEL AOUT3 L/R AOUT3VOLF AOUT3VOLC SYNC1 SYNC2 Last menu :

Def 0 2 OFF OFF 0 1 OFF OFF 3 3 OFF ON 3 15 0 0 3 1 1

Min 0 0 OFF OFF 0 0 OFF OFF 0 0 OFF OFF 0 0 0 0 0 0 0

Max 9 9 ON ON 7 7 ON ON 7 7 ON ON 7 31 3 7 7 1 1

Data 0 2 OFF OFF 0 1 OFF OFF 3 3 OFF ON 3 15 0 0 3 1 1

Enter Item :

Gate Array Chip Feature Setting No 1 2 3 4 Select : Descr PAP PAT INDEX EPG Last menu : Min OFF OFF OFF OFF Enter Item : Max ON ON ON ON Data OFF OFF OFF ON No 1 2 3 4 5 6 7 8 9 10 11 12 Descr SMART ROM Curve DAC PD VSTILL1 S1 S0 VDCL FFSW PKI FH FV H OFFset Last menu : Def OFF 0 OFF 0 0 0 1 1 1 1 1 0 Min OFF 0 OFF 0 0 0 0 0 0 0 0 -15 Enter Item : Max ON 1 ON 1 1 1 1 1 1 1 1 15 Data OFF 0 OFF 0 0 0 1 1 1 1 1 0

Select :

- 25 -

Colour Decoder 1 No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 Select : Descr Tint P/N Gw P/N ID Sub Colour Sub Contr Sharp FO Sharp EQ Sharp Gain Y-Out Lev BS Point C-Out Lev DC Rest BPF FO BPF Q Filter Sw C-Trap Sw S-D Trap LPF Y-DL N-Comb Video Sel RGB Sel Half Tone CrOFF.1 CbOFF.1 CrOFF.2 CbOFF.2 V CD Freq V CD Mode AFC SENS MVM S R-Y Adj S B-Y Adj BELL/HPF BELL FO S GP S ID RGB1 ENB HS-PH Auto SW VP-PH S/N RATIO Last menu : Def 31 OFF OFF 7 8 1 2 9 35 0 45 0 1 1 OFF 1 ON ON 8 ON 0 0 OFF 7 7 7 7 3 1 1 OFF 6 4 2 OFF 0 OFF OFF 0 1 0 3 Min 0 OFF OFF 0 0 0 0 0 0 0 0 0 0 0 OFF 0 OFF OFF 0 OFF 0 0 OFF 0 0 0 0 0 0 0 OFF 0 0 0 OFF 0 OFF OFF 0 0 0 0 Max 63 ON ON 15 15 3 3 15 63 3 63 3 3 3 ON 1 ON ON 10 ON 15 3 ON 15 15 15 15 7 3 3 ON 15 15 3 ON 3 ON ON 1 3 1 3 Data 31 OFF OFF 7 8 1 2 8 35 0 45 0 1 1 OFF 0 ON ON 8 ON 0 0 OFF 7 7 7 7 3 1 1 OFF 6 4 2 OFF 0 OFF OFF 0 1 0 3

Backend No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 Descr R-on G-on B-on D-col Wb-Sw Gamma-L Contrast BLK-Bottom Hue Colour-Axis Colour CTI-Level Brightness S-Abl Sharpness LTI-Level R-Drive PLimit-Lvl G-Drive ABL-Mode B-Drive CTI-Mode Sub Bright Gamma R-Cutoff LTI-mode G-Cutoff DPIC-Level B-Cutoff DC-Tran Sub-Cont LRGB2-Lvl P-Abl ABL-TH CB-offset Aging-W Aging-B CR-offset System Y-offset VM-Level Sharp FO CD-Off Sharp CD Sharp F1 Pre/Over VM-Cor VM-F0 VM-Limit VM-Delay Sub Colour Last menu : Def ON ON ON 0 OFF OFF 40 3 20 1 31 2 25 0 25 0 35 3 41 0 41 0 6 0 31 0 31 1 31 0 7 8 15 0 31 OFF OFF 31 1 7 2 ON OFF 0 0 2 0 0 0 2 0 Min OFF OFF OFF 0 OFF OFF 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 OFF OFF 0 0 0 0 OFF OFF 0 0 0 0 0 0 0 -8 Enter Item : Max ON ON ON 3 ON ON 63 3 63 3 63 3 63 3 63 3 63 3 63 3 63 3 63 3 63 3 63 3 63 3 15 15 15 15 63 ON ON 63 3 15 3 ON ON 3 3 3 3 3 3 3 8 Data ON ON ON 0 OFF OFF 43 2 32 1 31 2 31 0 30 0 43 3 41 0 41 0 31 3 31 0 31 1 31 0 7 8 15 0 31 OFF OFF 31 1 7 2 ON OFF 0 0 2 1 0 0 1 0

Enter Item :

Ext. Deflection No 1 2 3 4 5 Descr DF Phase DQP Phase Mid Linear DQP ac Lvl DQP dc Lvl Last menu : Def 185 125 135 126 126 Min 0 0 0 0 0 Enter Item : Max 255 255 255 255 255 Data 185 125 166 124 116

Select :

Select :

- 26 -

Deflection

Deflection System Adjustment 1.
Def 31 22 20 31 31 31 31 7 7 31 7 7 1 15 1 85 0 3 3 3 3 3 15 OFF OFF 0 0 ON OFF OFF OFF 0 2 OFF 52 3 8 OFF OFF 0 OFF OFF 31 2 0 0 0 0 7 0 8 2 2 31 OFF OFF 31 Min 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 OFF OFF 0 0 OFF OFF OFF OFF 0 0 OFF 0 0 0 OFF OFF 0 OFF OFF 0 0 0 0 0 0 0 0 0 0 0 0 OFF OFF 0 Enter Item : Max 63 63 63 63 63 63 63 63 63 63 15 15 3 15 31 255 63 15 3 3 3 3 31 ON ON 15 15 ON ON ON ON 3 3 ON 63 3 63 ON ON 63 ON ON 63 3 15 15 15 15 15 7 31 3 15 63 ON ON 63 Data 38 15 17 27 29 27 39 40 25 23 7 5 0 7 8 85 37 7 2 2 0 0 15 OFF OFF 0 0 ON OFF OFF OFF 0 2 OFF 52 3 8 OFF OFF 0 OFF OFF 31 2 0 0 9 0 7 0 0 2 2 31 OFF OFF 31

No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

Descr H-Size H-Position V-Size V-Position Pin-Amp Up-Cpin Lo-Cpin AFC-Bow AFC-Angle Pin-Phase V-Lin S-Corr Rotation-1 Rotation-2 H-Trap H Linear HC-Par-Amp MP-Par-Amp UpPin Axis LoPin Axis UpPin Gain LoPin Gain AKB-Tim BLK-Off AKB-Off Up-Blk Lo-Blk V-On Ew-Dc Uc-Pol Vblk-Sw Sync-Phase AFC-Mode Rst-Sw Left-Blk Clp-Phase Right-Blk Clp-Gate Hblk-Sw V-Aspect Zoom-Sw Jmp-Sw V-Scroll V-Freq Up-Vlin Lo-Vlin V-Comp H-Comp VSaw1-Dc Pin-Comp VSaw1-Amp AFC-Comp MP-Par-Dc HC-Par-Dc Asp-Sw VDrv-Sw HC-Par-Pha Last menu :

2.

Program the Remote Commander for operation in Service Mode. [ See Page 24 ] and enter into `Service Mode' by pressing `VIDEO' button twice. Enter into the `Device Register Setting' then `Deflection' service menu. Select and adjust each item in order to obtain the optimum image.
V SIZE

V LIN

AFC BOW

V POSITION

H POSITION

H SIZE

PIN AMP

PIN PHASE

UP-CPIN

AFC ANGLE

LO-CPIN

4-2. Volume Electrical Adjustments
Sub Colour Adjustment 1. 2. 3. Input a PAL colour bar signal. Connect an oscilloscope to CN5400 pin 5 located on the C Board. Program the Remote Commander for operation in Service Mode. [ See Page 24 ] and enter into `Service Mode' by pressing `VIDEO' button twice. Enter into the `Device Register Setting' then `Backend' service menu. Adjust `Sub Colour' data so that the right sides of the waveform are of equal height.

4.

Same Level

Select :

B-Out Waveform

- 27 -

4-3. TEST MODE 2:
Test Mode 2 is available by programming the remote commander for operation in service mode (see page 24) and pressing the `VIDEO' button twice, OSD `TT' appears. The functions described below are available by selecting the two numbers. To release the `Test mode 2', press `0' twice or switch the TV set into Stand-by mode.

00 01 02 03 04 05 06 07 08 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

'TT' mode off Picture maximum Picture minimum Volume=30% (speaker/headphone) Volume=50% (speaker/headphone) Volume=65% (speaker/headphone) Volume=80% (speaker/headphone) Ageing mode Shipping Condition No function Sub picture adjustment Sub colour adjustment Display software version and TV set configeration No function Picture Rotation test Picture level 50% Audio mute on No function Sub brightness adjustment No function Destination A Destination L Destination E Destination U Destination D Destination B Destination K Destination R No function Geometry Adjustment 1 Geometry Adjustment 2 Error monitor No function CRT 4:3 <> 16:9 ; Display TV status Line 23 detection switch Velocity Modulation (VM) test No function No function No function Screen mode check Re-initialise geometry (program 99) No function DRC100 DRC50 Reserved for dealer commander Re-initialise NVM (program 99) Set NVM as non virgin Set NVM as virgin No function No function No function No function

54 55 56 57 58 59 60 61 62 63 64 65 67 68 69 70 71 72 73 74 75 76 77 78 81 82 83 84 85 86 87 88 90 91 92 93 94 95 96 97 98 99

No function No function No function No function Send NVM data to service connector Set NVM data from service connector No function Service mode Production mode Set picture reset NVM data from ROM Set picture reset NVM data from actual picture adjustment Reset error codes N board reset Ignore errors on Ignore errors off No function Copy default dates of PANORAMA/external PLL/MID/MIDX from ROM into NVM AV link test Clear all programmes except 1-5 and all station labels Adjustment for PIN Amp/Upper Corner Pin for MID, EPG and 12501 mode Adjustment for Lower Corner Pin/ Trapezoid for MID, EPG, 12501, SMART & 4:3 mode Adjustment for M Pin for 12501mode Picture Booster check No video mute BER display mode AV monitor mode 2k, 8k, 2k & 8k EEPROM clear File system re-format FE2d/others Personal ID reset Digital shipping No function Focus adjustment (Focus Phase/Ext. Deflection) with left and right joystick button Focus adjustment (DC LevelFocus Phase/Ext. Deflection) with left and right joystick button Reserved for software group only INDEX mode test command, released by 00 OSD mute ON/OFF TS pass through CI module Digital TT test command EMMA recovery enable/disable Speaker check, released by 00

- 28 -