Text preview for : _precision_shaper_©_.pdf part of Philips HQ-S964 Service Manual Shaper 1.6V 100mA - pag. 4
Back to : _precision_shaper_©_.pdf | Home
Precision Shaper HQ-S964
Philips Domestic Appliances and Personal Care
Service Manual
SAP coding: HQS964 PRODUCT INFORMATION General description: The Philishave D-Finer is the first Precision shaper. A precision shaper is a specialized contouring appliance, created for men with specially shaped beards and sideburns. It gives ultimate control for defining precise lines and edges with unlimited styling possibilities. Materials used: - housing parts - others : ABS : POM / steel / Nickel (Shaving foil) NOTES : · In order to guarantee the longest possible workinglife of the battery: - do not charge for more than 24 hours - do not keep the charging unit permanently plugged in - discharge the battery completely once a year by letting the motor run until it stops · If the battery is empty and the consumer wants to trim his beard, the trimmer has to be charged for at least 1.5 hours to have enough power for one trim · The appliance should be charged again, when not used for a long period Features: - 15mm hi-definition trimmer (Maintenance free cutting element: no oiling required) - 17mm miniature foil - Cleaning brush included
Product meets the requirements regarding interference suppression on radio and TV.
Never use again a deformed housing clamp (5). After the product has been repaired, it should function properly and has to meet the safety requirements as laid down and offically established at this moment.
Published by Philips Domestic Appliances and Personal Care
Printed in the Netherlands
© Copyright reserved
Subject to modification
03/03
HQ-S964
TECHNICAL INFORMATION - Power supply primary (EU) secondary (EU) primary (USA) secondary (USA) - Charging time - Cordless operation time - Charging indication - Dimensions Blister - Weight Blister - Weight product : : : : : : : : : : : Rechargeable (RC) 220 - 240 V - 50/60 Hz 1,6 V - 100 mA 120 V - 60 Hz 1,6 V - 100 mA 10 h (NiCd & NiMh) 40 minutes (NiCd & NiMh) LED on adapter 16 x 9,4 x 24,7 cm 0,38 kg 104 g
NOTE (only for USA) : In the time between week 12 - 2003 and week 17 - 2003 (start of production), D350 appliances have been produced with a wrong typeplate text. 1.) The text on the typeplate of such a appliance tells you: USE ONLY WITH DIRECT PLUG IN TRANSFORMER 4203 035 78420 2.) The right text should be: USE ONLY WITH DIRECT PLUG IN TRANSFORMER 4203 030 77990 The typeplate text on the adapter is: MODEL: 4203 030 77990 Be informed, that the adapter is the right one, only the 12NC at the typeplate is wrong on appliances, which were produced in the time between week 12 - 2003 and week 17 - 2003. From week 18 - 2003 onwards the typeplate of the appliance is corrected as shown in point 2.
2-4
DISASSEMBLY- AND RE-ASSEMBLY ADVISE To open the appliance: - remove: Protecting cap (1) Foil housing (2) Housing clamp (5) To exchange the Profiler: - open the appliance - remove: Motion converter (7) Profiler cover (8)
HQ-S964
To exchange the Shaving foil assy (3): Push slightly, till the shaving foil assy (3) falls out of the foil housing (2).
Profiler assy (9)
REPAIR INSTRUCTIONS
Never use again a deformed housing clamp (5). Before closing the appliance, be sure that the wiring is on its correct position. After the product has been repaired, it should function properly and has to meet the safety requirements as laid down and offically established at this moment.
OPTIONAL (accessories) - No specific issues
NI-Cd
3-4
PARTS LIST & EXPLODED VIEW
HQ-S964
8
9
10 11 1 2 3 4 5 7 6
14
12
6 13
Pos 1 2 3 4 5 6 7 8 9 10
Service code 4203 035 79200 4203 035 79210 4203 035 79220 4203 035 79230 4203 035 79240 4203 035 79250 4203 035 79260 4203 035 79270 4203 035 79280 4203 035 79290
Description Protecting cap Foil housing Shaving foil assy Lamination cutter Housing clamp Housing set Motion converter Profiler cover Profiler assy On / Off Knob
Pos 11 12
Service code 4203 035 79310 4203 035 77100 4822 138 10551 4822 479 30183 4203 035 78390 4203 035 78400 4203 035 78410 4203 035 78420
Description Motor Rechargeable battery - NiCd Rechargeable battery - NiMh Cleaning brush Adapter - EU NiCd / NiMh Adapter - GB Adapter - CANADA Adapter - USA
13 14
4-4