GD910T-back.pdf part of Adi GD-910 adi_gd910t.rar, Schematics for ADI G900, GD910t monitors text manual preview

Text preview for : GD910T-back.pdf part of Adi GD-910 Schematics for ADI G900, GD910t monitors

Back to : adi_gd910t.rar | Home

Back cover assembly and disassembly instruction
1. Assembly a. Put the CRT surface side of the monitor down to the protential table mat. b. Insert the video cable through the back hole of the back cover. c. Put down the back cover slowly. d. Ensure the back cover is inserted well into the base side of the bezel. e. Push down the top side of the back cover lightly to insert it into the bezel. f. Lock the screws to its both sides, totaly 4 pcs. g. In sert two covers of screw into holes of back cover.

2. Disassembly a. Pull up two covers of screw from the back cover both side. b. Lossen the screws of its both sides. c. Pull up the back cover lightly by the rear side of the back cover. d. Take off the back cover.

Bezel screw hole Back cover screw hole

Swivel base Screws