Samsung-K57A (N).pdf part of SAMSUNG CL-29K3W SAMSUNG CL-29K3W.rar, No. de servicio CL29K3WKX/XAX text manual preview

Text preview for : Samsung-K57A (N).pdf part of SAMSUNG CL-29K3W No. de servicio CL29K3WKX/XAX

Back to : SAMSUNG CL-29K3W.rar | Home

Alignment and Adjustments

4. Alignment and Adjustments
4-1 Preadjustment
4-1-1 Factory Mode 4-1-3 When CRT Is Replaced

1. Do not attempt these adjustments in the Video Mode. 2. The Factory Mode adjustments are necessary when either the EEPROM (IC202) or the CRT is replaced. 3. Do not tamper with the "Adjustment" screen of the Factory Mode menu. This screen is intended only for factory use.
4-1-2 When EEPROM (IC202) Is Replaced

1. Make the following adjustments AFTER setting up after setting up purity and convergence : White Balance Sub-Brightness Vertical Center Vertical Size Horizontal Size Fail Safe (This adjustment must be the last step). 2. If the EEPROM or CRT is replaced and set SC as 30(factory mode).

1. When IC202 is replaced all adjustment data revert to initial values. It is necessary to re-program this data. 2. After IC202 is replaced, warm up the TV for 10 seconds.
4-2 Factory/Service Mode
4-2-1 Procedure for the "Adjustment" Mode

1. This mode uses the standard remote control. The Service Mode is activated by entering the following remote-control sequence : (1) DISPLAY FACTORY. (2) STAND-BY MUTE 1 8 2 POWER ON. 2. The "SERVICE (FACTORY)" message will be displayed. The Service Mode has four components: ADJUST, OPTION , G2-ADJUST and RESET. 3. Access the Adjustment Mode by pressing the "VOLUME" keys ( Up or Down). The adjustment parameters are listed in the accompanying table, and selected by pressing the CHANNEL keys ( , ).

4. Selection sequences for the all system: DOWN or UP key: SCT>SBT>BLR>BLB>RG>GG>BG>VSL>VS> VA>HS>SC>CDL>STT>AKB>NDL>NSR> SCBT>VOL>CAP>MVOL>RP00>RP01> AGCS>OMD>SCL>PWL>MUS>AGC> HPAR>HBOW>EWID>EPAR>EUCN>ELCN> ETRP>VZ>SVM>VMA>SSP>PSNS> DNSR>DSBT>DCDL>DBLR>DBLB>DSK 5. The VOLUME keys increase or decrease the adjustment values (stored in the non-volatile memory) when Adjustment Mode is cancelled. 6. Cancel the Adjustment Mode by re-pressing the "FACTORY" or "Power OFF" keys.

Samsung Electronics

4-1