Text preview for : Cover.pdf part of XEROX XE service manual
Back to : XE_Cover.rar | Home
Pictorial indication
This manual uses p~ctonal indications for quick grasp of safety measures. Be sure to understand the following descriptions before reading the manual text.
DO not put a vessel with water in it or a metal piece (such as scissors) on the copier. If dropped over or inslde the machine, a fire or an electric shock may be resulted.
A
A
WARNING
AI-ENTION
If this precaution is not observed, a serious damage or death may be resulted. If this precaution is not observed, a damage may be resulted to the machine and objects around the machine or the operator of the machine.
8
Meaning of pictorial
n Q Q
indications
If a metal piece or water should be dropped inside the machine, immediately turn off the power switch and disconnect the power plug from the power outlet. Then contact the distributor. If the machine is used without proper treatment, a fire or an electric shock may be resulted.
lndlcates something which must be taken great care of Indicates something which must not be done. Indicated something which must be done.
AWARNING
Observe the power specifications of 15A or above and a IOOV power outlet (wtth a groundlng terminal. If not, a fire may be resulted.
8
Avold complex wing. resulted. If not, a fire or an electric shock may be
In case of any abnormality such as an overheating. smoking, an abnonal smell, stop using the machine. If the machine IS used without proper treatment, a fire or an electric shock may be resulted. In such a case, immediately turn off the power switch and disconnect the power plug from the power outlet. Then contact the distributor.
e
Do not damage, break, or process the power cord. Do not put a something heavy on the cord, do not pull or bend the cord forcibly. If not, a fire or an electric shock may be resulted.
AvoId touching the power plug with a wet hand. If not, an electric shock may be resulted.
DO not remodel or modlfv the machine. It mav cause a fire or an electric shock.
AWARNING
Be sure to connect the grounding wire (green wire attached to the power cord) and the grounding terminal (which was processed by the distributor) first. If not, a fire or an electric shock may be resulted. (The grounding work process is charged.)
Grounding &ninal
AATTENTION
Do not put the machine on an unstable or slanted surface. It may cause a drop or fall of the machine, resulting in a damage. Be sure to put the machine on a stable desk.
When moving the machine, turn off the power switch and disconnect the power plug from the power outlet. The earth wire must be dlsconnetted at last. If not, the cord is damaged to cause a fire and electric shock.
e
AATTENTION
Avoid seeing the light source directly. It may damage your eyes.
Avoid installation of the machine in a wet, dusty place. It may cause a fire or an electric shock.
When closing the front cover for paper jam process or maintenance, be careful not to pinch your fingers.
When leaving the machine unused for a consIderable time, turn off the power switch and disconnect the power plug from the power Outlet for safety
6 n
When disconnecting the power plug from the power outlet, do not pull the power cord If the power cord is pulled forcibly, the core wire may be exposed or disconnected to cause a fire or an electric shock.
Do not cover the machme with a dust cover, cloth, or vinyl sheet with the power ON. It disturbs heat radiation to cause a fire
When removing a paper]am, do not touch the fusing section, which is heated to a high temperature. Touching the fusing sectron may cause a bum. Fusing section
Do not put a toner cartridge or a developer cartridge into a fire. Toner may disperse to cause a bum. Keep the cartridges away from children.
8
When connecting with a computer, turn off the power switch of the machine and the computer before connection. If not, an electric shock ordamaae may be caused.