Text preview for : 07_Schematic_Diagram_E(Ver2.0).pdf part of Samsung 632NW Samsung monitor TFT-LCD 632NW chassis LS16PEN



Back to : Samsung monitor TFT-LCD 6 | Home

7. Schematic Diagram

7. Schematic Diagram
7-1. Circuit Descriptions

Location Scaler IC200 Flash Memory IC201 IC203 Regulator

SE717M-LF SE717M-

SCALER

Function Besides the ADC, LVDS, and scaling part, an MCU is embedded as well. All of them are integrated into one chip. Stores the MCU program embedded in the scaler. It is of a flash type and rewritable. Stores the OSD and various timing values. An IC that receives DC voltage inputs. It is used in circuits that stabilize the DC voltage.

Remark SE717M-LF MX25L1005MC 24C08 AP1084K18A AP1117D-33A

7-1

7. Schematic Diagram

7-2. Schematic Diagrams(Main Block Diagram)

7-3. Schematic Diagrams(Main Block Diagram)
Panel LVDS signal Key input Crystal

SE717M-LF (Scaler) Embeded MCU
Function: Transmits the LVDS signals obtained by scaling the received analog or digital inputs to fit the panel resolution. Since the MCU Core is embedded, it performs the existing Micom function but uses external memory as it has no internal memory.

MX25L1005MC (Flash Memory) Function: Saves the MCU code (Hex) data

SDR

I2C

24C08 (NVRAM) Function: Saves the timing value for each OSD and mode.

Analog Signal

Function Ass'y Function: Transmits the voltage value input when pressing a key.

7-2

7. Schematic Diagram

7-4. Schematic Diagrams(Panel Part)

7-3

7. Schematic Diagram

7-5. Schematic Diagrams(IP Board)
SMPS Part

7-4

7. Schematic Diagram

Inverter Part

7-5

7. Schematic Diagrams

7-6. Schematic Diagrams (Main PBA)
This Document can not be used without Samsungs authorization.

VIN

VOUT ADJ

1

IN

OUT OUT GND

3

2

7-7

7. Schematic Diagrams

Memo

7-8