| Make | Model | Problem | Solution | Date |
| | | |
| Found: 39
|
| Crown | CTF1401R | Field collapse | R200 4R7 feed to D200 FOP supply o/c - no other FF | 14-09-04 |
| Crown | CTF142 RSL | Crown CTF142 TV when powered on displays a white horizontal line in the center of the screen. Upon inspection i discovered that Resistor R625 was fried. However i cannot see the code as it has burnt away. Id be greatfull for any help. Also would i need to | replace vertical ic w/ corresponding passive components like cap./
resistor r625 is fusible resistor like 0.5 ohm. | 25-06-05 |
| Crown | CTF14R | St/by only - LED lit | R521 100k near HT sw trs | 14-09-04 |
| Crown | CTF14R/T | Dead - LOPTx squealing - blows LOPTr | C261 22nF leaky | 14-09-04 |
| CROWN | CTV-7296 | I have this tv model and at this moment it just has sound,
not image.
| Could possibly be suffering from frame collapse, try turning up the screen voltage on the LOPT slightly and see if a white line appears across the screen, otherwise I would be looking to see if the tube heaters are lit. | 04-05-06 |
| Crown | CTV9528NFT | Dead with TR15 S2000N S/C | Replace S2000N and C102 100ufd which was down to 20ufd | 14-09-04 |
| Crown | CTV9528NFT | Green 'tubey' picture | R28 68K on tube base | 14-09-04 |
| Crown | CTZ9002R | st/by only | Pri HT at chopper tr - R320 120k 1/4w in psu o/c | 14-09-04 |
| Crown | CTZ9009R | E/W fault & width varies | Scan coils | 14-09-04 |