| Make | Model | Problem | Solution | Date |
| | | |
| Found: 6
|
| Metz | 11AK20 Chassis | Switches to standby when hot. | Change/replace C601 100nf and C605 3,3uF. | 14-09-04 |
| Metz | 11AK20 Chassis | Won't search/Search menu is not correct. Displays "enter channel number" although tuner is not synthesised. | Replace microcontroller IC. | 14-09-04 |
| Metz | 7073 | Dead - R1974 safety res overheats | L1263 small transformer (triggering pulse on TIP 50 SMPS transistor base). | 14-09-04 |
| Metz | Chassis 679G | Won't start, led displays lit. | Check/replace D1211,D1210 and C1205 Cap on VK module. | 14-09-04 |
| Metz | Chassis 680G/681G | Gradual loss of contrast and focus from bottom of screen to top, when increasing brightness or in shiny passages. | Change or clean and readjust trimmer pot R857. | 14-09-04 |
| Metz | Chassis 680G/681G | Starts with black screen, if G2 increased and brightness and contrast are set to max, picture faintly visible. | Change TR901 in decoder module. Leak was detected with a VOM. | 14-09-04 |