| Make | Model | Problem | Solution | Date |
| | | |
| Found: 10
|
| Saba | 42SC42 ICC4 | Picture shifted down. Can not be adjusted properly with the vertical shift pot. | Resistor RF34 open circuit. | 14-09-04 |
| Saba | 6317 ICC6 | No sound | Replace TV86 SMD transistor. | 14-09-04 |
| Saba | CM Series | Loss of vertical and horizontal synchronisation | Change TDA2560 in PAL/SECAM module. | 14-09-04 |
| Saba | CM Series | Reduced height, black portion in the lower end of screen. | PCB 75 206 210 00 .Replace tantalum capacitor C792 - 22uF. | 14-09-04 |
| Saba | IKC2 M5506 | No signals | Replace II06 SDA 3202 in tuner | 14-09-04 |
| Saba | M5515 | Poor start up | CP59 1000µ | 14-09-04 |
| Saba | S Chassis withMTS2020SM Tuner | Int. snow with no picture.Seems to be DJs. | Replace 1nF SMD capacitor connected between pins 3 and 4 of SDA2101 | 14-09-04 |
| Saba | S Chassis-A57Mprocessor. | Starts with display not lit and stby led lit. When hot,no control functions from panel or IR sender. Snow on screen. | Clean control board thoroughly with a solvent, especially around Tr19-26-27.Change RR67-68-69 without measuring. To check, ground pin 21 of Mp(reset} and the TV should work. | 14-09-04 |
| Saba | T6770 | off - st/by only | T1516 on control board | 14-09-04 |
| Saba | TX 92 F | LED blinks sharp /faint | Smd RL 08 (6K8) vissible burnt ,replace LOPT ( Orega 40330-26 =HR 7360 ) | 14-09-04 |