Sony DVP-S533D free download

File name Sony_DVP-S533D.pdf

DVP-S533D RMT-D108A PX Model SERVICE MANUAL SPECIFICATIONS CD/DVD player Laser Signal format system Semiconductor laser NTSC General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity 110 to 240 V AC, 50/60 Hz 16 W 430 Ч 95 Ч 305 mm (17 Ч 33/4 Ч 12 in.) (w/h/d) incl. projecting parts 3.4 kg (7 lb 8 oz) 41°F to 95°F (5°C to 35°C) 5% to 90% Audio characteristics Frequency response DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1 dB)* DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB) CD: 2 Hz to 20 kHz (±0.5 dB) More than 115 dB (LINE OUT (AUDIO 1, 2) connectors only) Less than 0.0025% More than 100 dB (DVD) More than 97 dB (CD) Less than detected value (±0.001% W PEAK) Output level 2 Vrms (at 50 kilohms) ­18 dBm Load impedance Over 10 kilohms Wave length: 660 nm Signal-to-noise ratio Harmonic distortion Dynamic range Wow and flutter Supplied accessories · Audio/Video/S-link connecting cord (1) · S video cable (1) · Plug adaptor (1) · Remote commander (remote) RMT-D108A (1) · Size AA (R6) batteries (2) * The signals from LINE OUT (AUDIO 1, 2) connectors and 5.1 ch L, R connectors are measured. When you play the PCM sound tracks with 96 kHz sampling frequency, the output signals from the DIGITAL OUT (OPTICAL, COAXIAL) are converted to 48 kHz (sampling frequency). Design and specifications are subject to change without notice. Outputs and inputs Jack type Phono jacks Optical output connector Phono jack Phono jacks 4-pin mini DIN phono jacks LINE OUT (AUDIO 1, 2) DIGITAL OUT (OPTICAL) DIGITAL OUT (COAXIAL) LINE OUT (VIDEO 1, 2) S VIDEO OUT (1, 2) COMPONENT VIDEO OUT (Y, PB/B-Y, PR/R-Y) PHONES 5.1CH OUTPUT 0.5 Vp-p 1.0 Vp-p Y: 1.0 Vp-p C: 0.286 Vp-p Y: 1.0 Vp-p PB/B-Y, PR/R-Y: 0.7 Vp-p 12 mW 2 Vrms (at 50 kilohms) 75 ohms terminated 75 ohms, sync negative 75 ohms, sync negative 75 ohms terminated 75 ohms, sync negative 75 ohms 32 ohms Over 10 kilohms Phone jack Phono jacks CD/DVD PLAYER MICROFILM DVP-S533D TK-51 (RF/SERVO) SCHEMATIC DIAGRAM · See page 4-7 for printed wiring board and page 4-10 for waveforms. ­ Ref. No.: TK-51 board; 2,000 series ­ Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. RF/SERVO TK-51 4-11 4-12 DVP-S533D MS-46 (LOADING) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM ­ Ref. No.: MS-46 board; 3,000 series ­ There are few cases that the part isn't mounted in this model is printed on this diagram. MS-46 BOARD S001 (TRAY SENSOR) S001 CN001 LOADING MOTOR (CHUCK SENSOR) 11 05 1-675-146- (11) Power Block (HS-030SF) (SWITCHING REGULATOR) FR-150 (IR/POWER SWITCH) TK-51 (RF/SERVO) AU-212 (AUDIO) HP-111 (HEADPHONE) MS-46 (LOADING) SW-317 (SURROUND SWITCH) MB-85 (SIGNAL PROCESS/SERVO) FL-101 (FUNCTION SWITCH) LOADING 4-13 4-14 MS-46 DVP-S533D MB-85 (AV DECODER) SCHEMATIC DIAGRAM ­ Ref. No.: MB-85 board; 1,000 series ­ · See page 4-15 for printed wiring board. AV DECODER MB-85 (1/10) 4