File name Sony_DVP-S325_X.pdfDVP-S325/S525D/S725D
RMT-D108O/D108P/D109P/D111O/D111P
AEP Model
DVP-S325/S525D/S725D
SERVICE MANUAL
East European Model North European Model
DVP-S325/S525D/S725D
Russian Model
DVP-S325/S525D/S725D
Australian Model
DVP-S525D/S725D
E Model
DVP-S725D
Photo: DVP-S725D
SPECIFICATIONS
CD/DVD player
Laser Signal format system Semiconductor laser PAL/(NTSC) VIDEO OUT (1, 2) (S725D) S VIDEO OUT (S325/S525D) S VIDEO OUT (1, 2) (S725D) Phono 1.0 Vp-p jacks 4-pin Y: 1.0 Vp-p mini DIN C: 0.3 Vp-p (PAL) C: 0.286 Vp-p (NTSC) phono Y: 1.0 Vp-p jacks CB/B-Y, CR/R-Y: 0.7 Vp-p Phone 12 mW jack Phono 2 Vrms jacks (at 50 kilohms) 75 ohms, sync negative 75 ohms, sync negative 75 ohms terminated
Audio characteristics
Frequency response DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1 dB)* (S325/S525D) DVD (PCM 96 kHz): 2 Hz to 44 kHz (±0.5 dB)* (S725D) DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB) CD: 2 Hz to 20 kHz (±0.5 dB) More than 110 dB (LINE OUT (AUDIO) connectors only) (S325/S525D) More than 110 dB (AUDIO OUT connector only) (S725D) Less than 0.0025% More than 100 dB (DVD) More than 98 dB (CD) Less than detected value (±0.001% W PEAK) Output level 2 Vrms (at 50 kilohms) 2 Vrms (at 50 kilohms) 18 dBm Load impedance Over 10 kilohms
Signal-to-noise ratio
Harmonic distortion Dynamic range Wow and flutter
COMPONENT VIDEO OUT (Y, CB/B-Y, CR/R-Y) (S725D) PHONES (EXCEPT S325) 5.1CH OUTPUT (EXCEPT S325)
75 ohms, sync negative 75 ohms 32 ohms Over 10 kilohms
General
Power requirements Power consumption Dimensions (approx.) Mass (approx.) 220 240 V AC, 50/60 Hz 16 W (S325) 17 W (S525D) 22 W (S725D) 430 × 95 × 305 mm (w/h/d) incl. projecting parts 3.3 kg (S325) 3.4 kg (S525D) 4.0 kg (S725D) 5°C to 35°C Continued on next page
Outputs and inputs
Jack type Phono jacks Phono jacks Optical output connector Phono jack Phono jacks
LINE OUT (AUDIO) (S325/S525D) AUIO OUT (S725D) DIGITAL OUT (OPTICAL) DIGITAL OUT (COAXIAL) LINE OUT (VIDEO) (S325/S525D)
Over 10 kilohms Wave length: 660 nm Operating temperature
0.5 Vp-p 1.0 Vp-p
75 ohms terminated 75 ohms, sync negative
CD/DVD PLAYER
MICROFILM
DVP-S325/S525D/S725D
TK-51/54 (RF/SERVO) SCHEMATIC DIAGRAM Ref. No.: TK-51/54 board; 2,000 series
· See page 4-9 for printed wiring board and page 4-12 for waveforms.
Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
RF/SERVO
TK-51/54
4-13 4-14
DVP-S325/S525D/S725D
MS-29 (LOADING) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM Ref. No.: MS-29 board; 3,000 series
There are few cases that the part isn't mounted in this model is printed on this diagram.
MS-29 BOARD
S001 (TRAY SENSOR) S001 CN001
LOADING MOTOR
(CHUCK SENSOR)
11
05
FR-147 (S325/S525D: EXCEPT Australian) AU-209 (S325/S525D: EXCEPT Australian) FR-148 (S725D: Australian) AU-210 (S725D: Australian) FR-149 (S725D: EXCEPT Australian) AU-211 (S725D: EXCEPT Australian) FR-150 (S525D: Australian) AU-212 (S525D: Australian) TK-51 (IR/ |