File information: | |
File name: | bulletin_TVP0520_®_.pdf [preview KV-36FS12 KV36FS13 KV-36FS16 KV-36FS17] |
Size: | 487 kB |
Extension: | |
Mfg: | Sony |
Model: | KV-36FS12 KV36FS13 KV-36FS16 KV-36FS17 🔎 |
Original: | Subject: Transparent Bar In Picture 🔎 |
Descr: | Symptom: With a signal applied to the “S” Input of Video 1, while viewing a component signal connected to the Video 4 input. A transparent bar that travels across the screen can be seen - pag. 2 |
Group: | Electronics > Documentation |
Uploaded: | 05-06-2007 |
User: | salvacolnome |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name bulletin_TVP0520_®_.pdf S Sony Service Company National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 CONFIDENTIAL Service Bulletin TV Products No. CSV-1 Model: KV-36FS12, KV36FS13, KV-36FS16, KV-36FS17 520R3 Subject: Transparent Bar In Picture Symptom: (1343) Date: September 17, 2001 With a signal applied to the "S" Input of Video 1, while viewing a component signal connected to the Video 4 input. A transparent bar that travels across the screen can be seen. Solution: If the customer should complain of the symptom above please implement the following circuit change, on the UY Board. Add two jumpers to the UY board. Use 24AWG insulated wires as follows: 1. 2. D238 Anode to R1215 ground side. D201 Anode to C1205 ground side. Add jumper between R1215 & Anode of D238 Board location: R1215 (Ground side) D238 (Anode side) Component side G-7. G-7. Reference: TV2001-02 PRINTED IN USA TV Products Service Bulletin No. 520R3 Add jumper between C1205 Ground side & D201 Anode side Board Location: C1205 (Ground side) D201 (Anode side) Component side H-8 G-7 |
Date | User | Rating | Comment |