Agilent HP 54520C_252C 22C_252C 40C_252C 42C Programmer free download

File name HP 54520C_252C 22C_252C 40C_252C 42C Programmer.pdf

Programmer's Reference Publication number 54542-97041 First edition, November 1995 This book applies directly to firmware revision 2.XX. For Safety information, Warranties, and Regulatory information, see the pages behind the index Copyright Hewlett-Packard Company 1993-1995 All Rights Reserved HP 54520C and 54540C Series Oscilloscopes Notice Hewlett-Packard to Agilent Technologies Transition This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett- Packard's former test and measurement, semiconductor products and chemical analysis businesses are now part of Agilent Technologies. To reduce potential confusion, the only change to product numbers and names has been in the company name prefix: where a product name/number was HP XXXX the current name/number is now Agilent XXXX. For example, model number HP8648 is now model number Agilent 8648. Contacting Agilent Sales and Service Offices The sales and service contact information in this manual may be out of date. The latest service and contact information for your location can be found on the Web at: http://www.agilent.com/find/assist If you do not have access to the Internet, contact your field engineer or the nearest sales and service office listed below. In any correspondence or telephone conversation, refer to your instrument by its model number and full serial number. United States Latin America New Zealand (tel) 1 800 452 4844 (tel) (305) 269 7500 (tel) 0 800 738 378 (fax) 1 800 829 4433 (fax) (305) 269 7599 (fax) 64 4 495 8950 Canada Japan Asia Pacific (tel) +1 877 894 4414 (tel) (81) 426 56 7832 (tel) (852) 3197 7777 (fax) +1 888 900 8921 (fax) (81) 426 56 7840 (fax) (852) 2506 9284 Europe Australia (tel) (31 20) 547 2323 (tel) 1 800 629 485 (fax) (31 20) 547 2390 (fax) (61 3) 9210 5947 Printed in USA July 2004 ii In This Book Introduction to Programming 1 an Instrument 2 Programming an Instrument Programming and 3 Documentation Conventions This programmer's reference contains general information, remote programming information, programming examples, and 4 Example Programs oscilloscope commands for programming the HP54520C and HP 54540C Series Oscilloscopes. 5 Common Commands Instruments covered by the Programmers Reference. 6 Root Level Commands This Programmer's Reference contains programming information for the following models: 7 SYSTem Subsystem