Keithley 7058-901-01B free download

File name 7058-901-01B.pdf

Model 7058 low Current Scanner Plug-In Card Instruction Manual Contains Operating and Servicing Information Model 7058 Low Current Scanner Plug-In Card Instruction Manual 0 1991, Keithley Instruments, Inc. Test Instrumentation Group All rights reserved. Cleveland, Ohio, U.S.A. October 1991, Second Printing Document Number: 7058-901-01 Rev. B Safety Precautions The following safety precautioos should be obsewed before using this product and any asno- ciated instrumcntatioo. Although some inrtromeots and accessories woold nonnally bo used with nowhazardous voltages, there arc situations wberc hazardous conditions may be present. This product is intended for use by qualified personnel who rccogoiu: shock hazards and are familiar with tbc safety pnxaotions rcqoircd to avoid possible injuly. Read lbe operating it]- formation carefully before using the product. `The types of product users arc: Kesponsiblc body is tbe iodividunl or group responsible for the USCsod owinleoaoce of equipment, for ensuring tlnt the equipment ia operated within its spccilications and operat- ing limits, and for ensuring that operators are adequately trained. Operators use the product for its intended function. Tbey most be trained in electrical safety procedures and proper use of the iostrument. `lhey most be protected from electric shock and ~onmt with hazardous live circuits. Maintenance personnel perform mutioe procedures oo the product to keep it operadog, for example, setting the hoc voltage or replacing consumable materials. Maintenance proccdurcs am dcacribed in the manual. The procedures explicitly state if the operator ~nay perform them. Othcrwisc, they should be performed only by senice pcnonoel. Service personnel are trained to work on live circuits, sod perfoonn safe installations sod re- pairs of products. Ooly properly trained setvice personocl may perform installation and scr- vice procedures. Exercise extreme caution whco a shock hazard is present. Lethal voltage may be present on cable coonector jacks or test fixtures. 111~ American National Standards lostitute (ANSI) stam that a shock hazard exists wheo voltage levels greater than 30V RMS, 42.4V peak, or 60VDC are present. A good safety practice is to expect that hazardous voltage is present in any unknown circuit before measuring. Users of this product must be protected fmm electric shock at a