| Make | Model | Problem | Solution | Date |
| | | |
| Found: 438
|
| Samsung | CI537V | Display but no line drive | D912 in supply to line osc leaky | 14-09-04 |
| Samsung | CI537V | Field roll from cold & on chan change | C307 0µ47 50v tant | 14-09-04 |
| Samsung | CI537V | Int dead with chattering relay | REL901 can be faulty or broken pin 3 in connector PH01 | 14-09-04 |
| Samsung | CI537V | Repeated failure of Q901 chopper Tr 2SC3552 | R910 270k hi res | 14-09-04 |
| Samsung | CI537V | Stuck in AV mode | Replace tuner where switching is carried out | 14-09-04 |
| Samsung | CI537V P55 | BLANK RASTER - WORKS ON VIDEO INPUT | TUNER UNIT US | 14-09-04 |
| Samsung | CI537V P55 | Blank screen. | IC TDA2653A due to lack of heatsink compound. | 14-09-04 |
| Samsung | CI537V P55 | Contrast low & unadjustable. | 12k res on front PCB. | 14-09-04 |
| Samsung | CI537V P55 | Dead - psu works but no standby dash. | XF001 ( 12Mhz ) xtal , D912. | 14-09-04 |
| Samsung | CI537V P55 | REPLACEMENT TUNER MOD WITH ECC-2885PLE ( S ) TWO PINS | ON LEFT AND READING L-R - BU - VT - BH - AGC - BL - AFT - OLD UNIT = 34519-990-040 ECU 5883PLE , NEW = 34519-9 | 14-09-04 |
|
|
| Samsung | CI537V P55 | SET COMES OUT OF STBY BUT RETURNS IN 10secs | D912 OC NO LINE OSC START UP SUPPLY | 14-09-04 |
| Samsung | CI541ZG | Dead with relay clicking | C411 100pF 2kv s/c in LOP stage | 14-09-04 |
| Samsung | CI541ZG | Dead with relay clicking | C411 100pF 2kv s/c in LOP stage | 14-09-04 |
| Samsung | CI541ZG | Frame collapse. | R412 ( 1R 1/2w fusible ) o/c. | 14-09-04 |
| Samsung | CI541ZG | Int shut down | Invisible dry joints at chopper trfmr | 14-09-04 |
| Samsung | CI541ZG | No red may be int. | Drys Q556 ( CRT PCB ) | 14-09-04 |
| Samsung | CI541ZG | No sound - set tripping - black bars on pic. | B5 rail @ 3.4v Infra red Rx leaky ( unplug PA01 - 5 rail restored ) | 14-09-04 |
| Samsung | CI541ZG | PSU & LOPT pulsing - no sound. | B5 rail @ 3.4v Infra red Rx leaky ( unplug PA01 - 5 rail restored ) | 14-09-04 |
| Samsung | CI541ZG | Sound crackling & cutting out. | R618 ( 5.6k ) near audio IC. | 14-09-04 |
| Samsung | CI541ZG | Stuck in standby. | Q402 ( 2SD1650 ) s/c. | 14-09-04 |
| Samsung | CI541ZG | Will not lock into channels - no sound. | B5 rail @ 3.4v Infra red Rx leaky ( unplug PA01 - 5 rail restored ) | 14-09-04 |
| Samsung | CI591 | Dark pic with ringing | Caps in 175v supply to RGB low - C560 2µ2 400v on crt base & C410 220µ 200v on main pcb | 14-09-04 |
| Samsung | CI5913 CI6813 U U88 | DARK PICTURE | CHECK C416 ( 155v SMOOTHING ) REPLACE WITH 47mfd 250v | 14-09-04 |
| Samsung | CI5913 & CI6813 | If HT smoother C560 2µ 250v has failed (on CRT base) | Change C410 or C401 from 220µ 100v to 47µ 250v. Connect -ve pin to chassis. Change C416 from 2µ2 250v to 47µ 250v. If R415 0R27 ?w is fitted check for o/c - if so replace - official Samsung mod | 14-09-04 |
| Samsung | CI5913 CI6813 U88 | FAILURE OF C560 ( 2.2mfd / 250v ) CRT BASE. | REPLACE C410 TO NEW TYPE AND CAY OUT MOD | 14-09-04 |
| Samsung | CI5913 U88 | HIGH FREQUENCY VIBRATION NOISE FBT VIBRATION , AND | REPLACE FBT ( 3 HOLE FIXING TYPE ) , BOND R414 , | 14-09-04 |
| Samsung | CI5913W | Excess width & no E-W corr | C416 2µ2 250v in anti breathing cct | 14-09-04 |
| Samsung | CI5913W | No pic - sound ok | When A1 advanced dim, wide pic seen. HT correct but had noise superimposed on it. C41 4µ7 400v u/s | 14-09-04 |
| Samsung | CI5937AN | dead | TDA2616A audio o/p chip s/c | 14-09-04 |
| Samsung | CI5937AN | Dead & whining - D808 R2K 170v overvolt diode s/c | Optocoupler PC801 dry joint pin 2 - causing no fback or HT reg | 14-09-04 |