| Make | Model | Problem | Solution | Date |
| | | |
| Found: 106
|
| Beko | NR17125T | Blows LOPTr after a few days | Check C140 22nF for o/c - upgrade to 1000vw | 14-09-04 |
| Beko | NR2541ND | Service mode access | Reqs RCU 14.1 pt no 7M187 (SEME) | 14-09-04 |
| Beko | NR26114 | Lack of height with line through | Field scan coils (read 30R) | 14-09-04 |
| Beko | NR26114R | Field collapse | R126 4R7 0/c, C113 100n s/c - sm & check TDA3653B | 14-09-04 |
| Beko | NR28128NX | Dead & squealing | LOPTx HR8007 approx ?16 | 14-09-04 |
| Beko | NR28128NX | No R/C - front controls ok | No activity around IC951 - chip faulty | 14-09-04 |
| Beko | NR28411ND | Dead | Check the following-IC 601 44608P40-CKU8 chopper control chip., T601 K2545 FET device., R611 1K, R639 15R, R606 & R607 0.47R, R609 68K, D601 IN4004, Posistor | 14-09-04 |
| Beko | NR28411ND | Dead with 2.5A fuse o/c | R639 15R 1/2w, R606/7 0R47 1/2w, IC601 MC44608P40 & Chopper Tr T601 K2545 | 14-09-04 |
| Beko | NR28416ND | Bright white raster | No 200v to TDA6108JF vid amp - crack in print by LOPTx ( under plastic cradle) | 14-09-04 |
| Beko | NR28416NDS | Dead aft thunderstorm | IC601 (MC44608P40), T601 (2SK2545) R606/607 (0.47R, 1/2W) in psu replaced | 14-09-04 |
|
|
| Beko | NR28416NDS | Dead with LOPTx insulation breakdown | LOPTx Pt no 058834-TR2 | 14-09-04 |
| Beko | NR30128T | Dead | LOPTx commonly goes faulty - SEME LOPTX35228P & R118 10k 1/2w burns out | 14-09-04 |
| Beko | NR30328 | Dead 1.6A fuse shattered | Dead s/c on chopper caused by s/c chopper tfmr | 14-09-04 |
| Beko | NR303281 | Tripping - s/c across LOP | C807 (470pF 2kV) adj to lopt s/c. | 14-09-04 |
| Beko | Various | Field collapse | Check R717 & R722 for o/c | 14-09-04 |
| Beko | Various | Field top foldover | 220R res over scan coils o/c | 14-09-04 |