APC DP300E free download

File name OH01GB09.PDF

DP300E Series Installation Guide Copyright © 1997 Silcon Power Electronics A/S Due to continuous product development information given in this manual is subject to change without notice. 7OH0001 GB rev.09 Installation Guide DP300E 1 7OH0001 GB rev.09 2 Installation Guide DP300E Contents: 1.0 2.0 3.0 Introduction Unpacking Placing 3.1 3.2 3.3 Requirements on the installation site Dimensions Foot prints 4.0 Connection 4.1 4.2 4.3 Connecting the DP300E System Integration Interface Communication interface - ComInterface 5.0 6.0 Starting up Programming parameters 6.1 6.2 6.3 6.4 General Parameters Programming of system configuration parameters Programming of battery monitor 7.0 8.0 Switching off Options/Accessories 8.1 8.2 8.3 8.4 8.5 8.6 8.7 Service Bypass Panel SBP300E - General arrangement MCCB/Fuse-box Battery Cubicle Isolation transformer module Parallel/Redundant operation Relay Board Weight Equalizer 9.0 Alarms 9.1 9.2 9.3 9.4 Introduction Displaying the alarm stack Displaying the events stack Possible Alarms 10.0 System specifications 10.1 Technical data 10.2 Back-up time, dimensions, and weight 11.0 Software 11.1 Choice of software 11.2 Configuration code at normal operation 11.3 Choice of cable 12.0 How to contact Silcon 7OH0001 GB rev.09 Installation Guide DP300E 3 Warning Read the warnings below before you start up connecting the UPS. 1. This UPS system contains hazardous AC and DC voltages and is supplied from more power sources! 2. Only qualified electricians are allowed to perform the installation according to national and local codes! 3. This UPS system has no built-in disconnecting devices for the external AC and DC input power sources. Disconnecting devices must be provided as external parts in connection with the installation! 4. The Installer must provide each external disconnecting device for this UPS system with labels having the following wording: "Isolate the Uninterruptible Power Supply (UPS) as instructed in this guide before working on the circuit". 5. This system is equipped with an auto-start function. If activated the system may start without warning. Please refer to chapter 6: ,,Programming parameters" in this guide to ensure de-activation. 7OH0001 GB rev.09 4 Installation Guide DP300E Introduction ­ Unpacking 1.0 Introduction The information given in this installation guide is of general nature for the local authorized electrical installer. For the installation, please refer to national and local electrical codes. 2.0 Unpacking Warning: Do never lift or transport the system without the internal front cover plate mounted and fastened with screws. 1. 2. 3. 4. Unpack the system by removing the screws on the top and bottom part of the packaging side plates and lift up the side plates as a whole. Check that the type sign placed inside on the front door correspond to the ordered system, especially with respect to input / output voltages. To simplify later identification of the installed system ­ ple