| Make | Model | Problem | Solution | Date |
| | | |
| Found: 749
|
| Goodmans | 2025RS | Pic goes bright white int | 200v supply to CRT base varies due to C910 4µ7 leaky or dry joints | 14-09-04 |
| Goodmans | 2025RS | THREE COLOUR RINGS COVER ENTIRE SCREEN | REPLACE IC301 | 14-09-04 |
| Goodmans | 2028T/2195T | Chans locked | XT01 27Mhz Xtal | 14-09-04 |
| Goodmans | 2028T/2195T | Chans locked | XT01 27Mhz Xtal | 14-09-04 |
| Goodmans | 2028T/2195T | LOCKED UP WITH NO CHANNEL CHANGE | REPLACE XT01 27MHZ CRYSTAL | 14-09-04 |
| Goodmans | 2029T | BLANK RASTER WITH NO SOUND | CHECK C113 0.01MFD FOR S/C | 14-09-04 |
| Goodmans | 2029T | Blank raster with no sound - ok via scart | C113 0µ01 100v faulty off pin 2 IC101 | 14-09-04 |
| Goodmans | 2029T | Comes on in st/by - R/C will sw TV on | Q601 2SA1015, Q604 2SC1815 | 14-09-04 |
| Goodmans | 2029T | No sound/pic - ok via SCART | C113 0µ01 100v faulty off pin 2 IC101 | 14-09-04 |
| Goodmans | 2032 | Dead - smoking | C444 330pf 2kv | 14-09-04 |
|
|
| Goodmans | 2032 | Field - top foldover | C313 2µ2 200v o/c | 14-09-04 |
| Goodmans | 2040R | Dead StBy LED lit relay clicks when r/c pushed | R803 ( 390K ) pin 3 IC 801 o/c | 14-09-04 |
| Goodmans | 2040R | To use HR7455 Lopt add external 6 turn link winding around ferrite core | Connected to pin 4 (HT) & feedback network having removed one wire link | 14-09-04 |
| Goodmans | 2043 | Dead | psu working but no 106v o/p at D803 - FR803 4R7 fusible dry joints | 14-09-04 |
| Goodmans | 2043T | Black blobs on top sides of screen | C406 1µ 160v in line scan coupling | 14-09-04 |
| Goodmans | 2043T | Dark with high col content & tuner drift | 12v supply at C429 only 8v. R437 & R427 hi res - fit 1R5 1w types | 14-09-04 |
| Goodmans | 2043T | Dead | C805P 100µ 16v in psu | 14-09-04 |
| Goodmans | 2043T | DEAD | CHECK D8035 FOR O/C LOCATED OFF PIN B OF LOPTX | 14-09-04 |
| Goodmans | 2043T | Dead - HT ok at pin 17 of chopper tfmr | No HT at B+ of loptx - D8035 o/c | 14-09-04 |
| Goodmans | 2043T | Dead - psu working | D8035 GU3C - B term LOPTx | 14-09-04 |
| Goodmans | 2043T | Dead - psu working | D8035 GU3C - B term LOPTx | 14-09-04 |
| Goodmans | 2043T | DEAD HT LOW | REPLACE C8075 | 14-09-04 |
| Goodmans | 2043T | Dead or int dead | HT low - C8075 33µ 160v | 14-09-04 |
| Goodmans | 2043T | Dead or int dead | HT low - C8075 33µ 160v | 14-09-04 |
| Goodmans | 2043T | DEAD POWER SUPPLY OK | D8035 OC | 14-09-04 |
| Goodmans | 2043T | No OSD or menu | Micro lock up, sw off at mains then sw on holding in Vol+/Vol- | 14-09-04 |
| Goodmans | 2045RS/TS | No OSD or menu | Micro lock up, sw off at mains then sw on holding in Vol+/Vol- | 14-09-04 |
| Goodmans | 2045TS | Bright raster with fb lines - poss reduced width | Q901 KTA1266Y leaky or s/c | 14-09-04 |
| Goodmans | 2045TS | Bright raster with fb lines - poss reduced width | Q901 KTA1266Y leaky or s/c | 14-09-04 |
| Goodmans | 2045TS | Dead - no 12v pin 8 I802, low volts pin 4 I802 | I702 SDA5255-A022 | 14-09-04 |