| Make | Model | Problem | Solution | Date |
| | | |
| Found: 749
|
| Goodmans | GTV66W1 11AK19 | Dead - LOPTx s/c, when replaced, E-W errors | D611 (BY299) was leaky | 14-09-04 |
| Goodmans | GTV66W1 11AK19 | E/W dist | Dry joint C613 12nF, R629 27R safety res o/c, C630 390nF 250v low cap | 14-09-04 |
| Goodmans | GTV66W1 11AK19 | Narrow pic | C630 dry R629 2.7R burnt. Also replace D612 BY228 | 14-09-04 |
| Goodmans | GTV66W1 11AK19 | Tripping | Audio O/P IC TDA2615 | 14-09-04 |
| Goodmans | GTV66W1 11AK19B-1 | Width reduced & no E-W | C630, R629 2R7 and the BUK444 200A. | 14-09-04 |
| Goodmans | GTV66WI AK19 | Dead with rapid ticking | C630 390nF dry joint, BU2508AF LOPTr s/c | 14-09-04 |
| Goodmans | GTV69W3 11AK19 | Switching from Nicam to Mono then no sound | VL301 on Nicam PCB | 14-09-04 |
| Goodmans | GTV69W3BLU4 11AK19pro | R629 value | 2R7 in 28" 4:3; 27R in 28" widescreen; 44R in 32" widescreen | 14-09-04 |
| Goodmans | GTV9200 | Int loss of pic temp cured by adj of A1 | C801 2n2 1kv on crt base slight leak | 14-09-04 |
| Goodmans | GVT66W1 11AK19 | Lack of width & E/W faulty | R629 2R7 1/3w safety res o/c | 14-09-04 |
|
|
| Goodmans | GVT66W1 11AK19 | To enter service mode | Call up install menu then pres 4, 7, 2 & 5 in order | 14-09-04 |
| Goodmans | L6.3 | Dead with PSU squealing | C2012 2n2 1kv on vert PCB | 14-09-04 |
| Goodmans | L6.3 286NS | E/W dist & lack of width | Cap 2913 390nF 250v & mosfet tr 7908 STP4NA40F1 | 14-09-04 |
| Goodmans | SD1800 | CHILDLOCK | PRESS "STANDBY" AND "SYSTEM" TOGETHER | 14-09-04 |
| Goodmans | TV20RC | Dead set. | R802 o/c. | 14-09-04 |
| Goodmans | TV20RC | Frame collapse. | R326 ( 3ohm ) safety o/c. | 14-09-04 |
| Goodmans | TV20RC | No pic | R430 10R in 180v supply to RGB o/c | 14-09-04 |
| Goodmans | TV20RC | No sound | R601 560R o/c | 14-09-04 |
| Goodmans | TV20RC | No sound or raster - Sby LED & ch indicator Ok. | R801 ( 3.3ohm 10W ) o/c , Q801 ( STR5412 ) , D805 ( 1N4937 s/c. | 14-09-04 |
| Goodmans | TVC1400 | DEAD | CHECK FOR DRY JOINTS ON C817 | 14-09-04 |
| Goodmans | TVC1400 | POOR BRIGHTNESS LOOKS LIKE CRT | REPLACE C543 10MFD250V ON CRT BASE | 14-09-04 |
| Goodmans | TVC1400 | TRIPPING LED FLASHING | REPLACE C811 IN POWER SUPPLY | 14-09-04 |
| Goodmans | TVC1400 | Tripping with LED flashing in time | C811 in PSU | 14-09-04 |
| Goodmans | TVC1400 | Trips when first sw on | C811 100mfd 25v next to chopper tr | 14-09-04 |
| Goodmans | TVC141 | Child lock - unlocking | press blue/yellow/green/red/standby/standby within 10 secs | 14-09-04 |
| Goodmans | TVC141 | Dead | STRS5707, C835 2200pf 630v s/c (uprated to 2kv), R817 0R3 WW Res, C818 330µ | 14-09-04 |
| Goodmans | TVC141 | Dead - no st/by light | Dry joints on power sw - remove deck & main pcb for access | 14-09-04 |
| Goodmans | TVC141 | NO PICTURE OR SOUND (BLANK RASTER) | REPLACE MICRO AND ENTER SERVICE MODE AND SET LEVELS,(IC703) | 14-09-04 |
| Goodmans | TVC141 | No raster - sound ok | LOPTx faulty - no A1s | 14-09-04 |
| Goodmans | TVC141 CP420 | Focus & screen adj faulty - looks like CRT | I501 TDA8374A | 14-09-04 |