| Make | Model | Problem | Solution | Date |
| | | |
| Found: 917
|
| Sony | BE2 | DEAD , VOLTS AROUND STR WRONG. | CHECK PS801 0.6amp , IF o/c CHECK D611 ( R2M ) Sony 8-719-303-49 STR54041 Sony 8-749-901-65 | 14-09-04 |
| Sony | BE2 | Excess HT of 180v instead of 135v | STR54041 | 14-09-04 |
| Sony | BE2 | Int col | dry joints line timebase/psu | 14-09-04 |
| Sony | BE2 | Int or no col | Trimmer in Xtal ref osc cct - replace with 22 or 27pf fixed cap | 14-09-04 |
| Sony | BE2 | Sqealing psu with sound/pic present | C610 22µ 63v | 14-09-04 |
| Sony | BE2 | St/by only | PS801 cct prot 600mA in HT line o/c | 14-09-04 |
| Sony | BE2 KVM1410U | Int sound & vis | dry joint L50 next to IC502 TDA8304 | 14-09-04 |
| Sony | BE2 KVM1621U | Int pic - comes & goes when banged | Dry joints L501 | 14-09-04 |
| Sony | BE2/2A | No or int pic | C 012 (50V/22uf) near TDA3505 and clean PCB underneath. | 14-09-04 |
| Sony | BE2/A | Int col in sympathy with sound - goes off when tapped with EHT brushing effect also | Check earth pin on LOPTx for dry joint & LOPTr heatsink earth conn | 14-09-04 |
|
|
| Sony | BE2/A | Int colour | change the orange coloured colour trimmer CTV 3331 next to the 8.86meg X332 crystal for a green one salvaged from a scrap chassis. | 14-09-04 |
| Sony | BE2A | Blank raster - sound ok | Scastle pulse dist - DAN202 sm diode D504 leaky | 14-09-04 |
| Sony | BE2A | Blank raster/no sound | R04 470R sm on Txt pcb cracked | 14-09-04 |
| Sony | BE2A | Blue screen+Flyback lines | TDA3505G ( VIDEO PROC ) | 14-09-04 |
| Sony | BE2A | Colour intermit | CT332 trimmer dodgey, clean or replace pt no1-141-418-11 | 14-09-04 |
| Sony | BE2A | Dark pic with green flaring & burning smell | R812 1k 1w safety feed res for A1s burnt & D806 leaky used BY210/800 as replacement | 14-09-04 |
| Sony | BE2A | Dead - no start up volts | R602 270k under chopper tfmr | 14-09-04 |
| Sony | BE2A | Dead - st/by LED flashes every few secs | PS801 N15 cct prot - change to N38 (1.75A) | 14-09-04 |
| Sony | BE2A | DEAD-D611 SHORT DUE TO HIGH HT | C618 OPEN | 14-09-04 |
| Sony | BE2A | Dim pic - lacking in contrast when warm | CA021 22mfd 50v | 14-09-04 |
| Sony | BE2A | E-W bowing | C806 47n 250v split and faulty | 14-09-04 |
| Sony | BE2A | FAINT VERTICAL LINES LEFT SIDE OF SCREEN | FIT 150nf/250v CAP BETWEEN PINS 2 AND 3 OF CNC74 ( IS NEAR FOCUS POT ) 3 PIN PLUG. CAP PtNo 1-137-146-11 | 14-09-04 |
| Sony | BE2A | Field collapse | Check R801 ( 0.47R ) & PS501 if both o/c IC501 ( uPC1488 ) u/s if ok check for D/J around ic | 14-09-04 |
| Sony | BE2A | IC1001 REPLACEMENT FROM PCA84C840P/016 WHEN FITTIN | R025 FROM 100K TO 82K ( 1-216-093-00 ) C006 FROM 100pf TO 33pf ( 1-163-105-00 ) IC1001 ( 8-759-199-00 ) | 14-09-04 |
| Sony | BE2A | Int blank screen | dry joints at pin 16 TDA8304 IC502 and other pins | 14-09-04 |
| Sony | BE2A | Int col | replace CT332 trimmer with 15pf fixed cap | 14-09-04 |
| Sony | BE2A | Int col CT 332 reqs adj | To adj s/c pin 11 IC371 to chassis then adj CT332 for stationary pic or replace CT332 with 15pf cap | 14-09-04 |
| Sony | BE2A | Int flashing across pic | dry joints on loptx earth pin & chopper heatsink, C802 & heatsink for loptr | 14-09-04 |
| Sony | BE2A | Int Red | Not Q706,Q709 but vid proc chip IC302 TDA3505-V1 | 14-09-04 |
| Sony | BE2A | Interference - int , worse when tapped | Bad earth conn IC601 STR54041 heatsink | 14-09-04 |