| Make | Model | Problem | Solution | Date |
| | | |
| Found: 1771
|
| Ferguson | TX10 | Sound - mute & no signal - intermittent. | C22 ( 330pf ) | 14-09-04 |
| Ferguson | TX10 | Sound - normalise volume setting rises. | Change D101 to silicon type ie PH425. | 14-09-04 |
| Ferguson | TX10 | Sound - off tune when loud music is on. | IL01 ( LM341 ) 12v reg. | 14-09-04 |
| Ferguson | TX10 | Sound - on vision ( 100hz ) | Change C729 from 220n to 100n. | 14-09-04 |
| Ferguson | TX10 | Sound - poor sound. | Change C536 from 4n7 to 6n8. | 14-09-04 |
| Ferguson | TX10 | Sound - poor tone control. | Change C544 from 68n to 22n. | 14-09-04 |
| Ferguson | TX10 | Sound - vision buzz. | O/P TR654/5/6 on CRT base. | 14-09-04 |
| Ferguson | TX10 | Sound - volume & colour varies. | DJ on pin 1 of LOPTX. | 14-09-04 |
| Ferguson | TX10 | Sound - weak. | 12v reg IC621. | 14-09-04 |
| Ferguson | TX10 | Sound hum - flashing with slight line tearing | 150v rail min setting R813 ( 121R ) goes low. | 14-09-04 |
|
|
| Ferguson | TX10 | Sound on vis | audio cable to spkrs wrongly routed under chassis | 14-09-04 |
| Ferguson | TX10 | Sound-hum low freq varying with video content | 2 video o/p transistors leaky. | 14-09-04 |
| Ferguson | TX10 | Spooks effect. | Poorly dressed video o/p leads. | 14-09-04 |
| Ferguson | TX10 | Standby - at switch on. | C137 ( 470nf ) s/c. | 14-09-04 |
| Ferguson | TX10 | Standby - coming out of standby. | Remove C406 ( C106 ) print side between pins 19/12. | 14-09-04 |
| Ferguson | TX10 | Standby - faults - intermittent. | Dry-joints around T705 | 14-09-04 |
| Ferguson | TX10 | Standby - going into standby at switch on. | C137 ( 470nf ) s/c. | 14-09-04 |
| Ferguson | TX10 | Standby - going into standby. | DJ on pin 1 of LOPTX. | 14-09-04 |
| Ferguson | TX10 | Standby - intermittent. | Drys on T705. | 14-09-04 |
| Ferguson | TX10 | Standby - light still on after switch on. | C6 ( 2u 2f ) | 14-09-04 |
| Ferguson | TX10 | Striation on R/H side of screen. | C727 o/c. | 14-09-04 |
| Ferguson | TX10 | Stuck in standby. | R724 ( 1.2k ) | 14-09-04 |
| Ferguson | TX10 | Switch's to s/by & out but dead. | R724 1.2k o/c , TR801 ( BC547 ) 12v reg. | 14-09-04 |
| Ferguson | TX10 | Sync - line oscillator running at wrong speed | R744 ( 30K1 ) high. | 14-09-04 |
| Ferguson | TX10 | Sync - line speed incorrect. | R802 ( 5 6k ) high or o/c. | 14-09-04 |
| Ferguson | TX10 | Sync - loss of sync. | Poor contact at pin 3 of socket SK19A. | 14-09-04 |
| Ferguson | TX10 | Sync - poor line lock at switch on. | Change C742 from 220u f to 100u f &C745 from 100u f to 220u f | 14-09-04 |
| Ferguson | TX10 | Sync - poor line sync & low brightness. | C749 ( 4n7 ) o/c. | 14-09-04 |
| Ferguson | TX10 | Sync - poor line sync on pre-recorded tapes. | TR345 ( BC237 ) | 14-09-04 |
| Ferguson | TX10 | Sync - poor sync after 1 hour. | R601 high , IC33 ( SAA5030 ) IC1033 | 14-09-04 |