| Make | Model | Problem | Solution | Date |
| | | |
| Found: 1771
|
| Ferguson | TX100 | 88 on display - standby LED on - blank raster | Replace R1831. | 14-09-04 |
| Ferguson | TX100 | Black band down left hand side. | R48 ( 180k ) . | 14-09-04 |
| Ferguson | TX100 | Blank raster - no remote operation. | IC1807 ( SAB3035 ) | 14-09-04 |
| Ferguson | TX100 | Blank raster - no sound. | C24 ( 10nf ) leaky connected to pin 14 of IC2. | 14-09-04 |
| Ferguson | TX100 | Blank raster - standby LED on - 88 on display | Replace R1831. | 14-09-04 |
| Ferguson | TX100 | Blank raster. | R61 o/c , IC3 ( TDA3562A ) | 14-09-04 |
| Ferguson | TX100 | Blowing frame IC. | Change R96 to a 2.2k not 3.3 as mod sheet says. | 14-09-04 |
| Ferguson | TX100 | Blows chopper Tr int | C118 ( 8.2nF ) replace with ( 6.8nF ) | 14-09-04 |
| Ferguson | TX100 | Blue band at top of picture. | C45 ( 470nf ) . | 14-09-04 |
| Ferguson | TX100 | Blue bright picture. | IC4 ( TDA2578A ) | 14-09-04 |
|
|
| Ferguson | TX100 | Blue raster. | R605 o/c ( blue cathode volts about 70v ) | 14-09-04 |
| Ferguson | TX100 | Bright blue picture & line break-up. | TR10 ( T6071V ) | 14-09-04 |
| Ferguson | TX100 | Bright blue raster. | R604 , R608 , Rv12. | 14-09-04 |
| Ferguson | TX100 | Bright green raster. | R604 , R608 , R612. | 14-09-04 |
| Ferguson | TX100 | Bright raster & flyback lines. | TR60 on CRT base. | 14-09-04 |
| Ferguson | TX100 | Bright red raster. | R604 , R608 , R612. | 14-09-04 |
| Ferguson | TX100 | BRIGHT SCREEN , FLYBACK LINES | TR60 BC308 BCL. | 14-09-04 |
| Ferguson | TX100 | Bright yellow/red pic at sw on | Settles down when heated - CRT low emission | 14-09-04 |
| Ferguson | TX100 | Brightness - incorrect & east west fault. | D28 s/c or leaky. | 14-09-04 |
| Ferguson | TX100 | Brightness - level flicker on dark areas. | IC3 ( TDA3562A ) | 14-09-04 |
| Ferguson | TX100 | Brightness - varies with flyback lines. | TR60 on CRT base. | 14-09-04 |
| Ferguson | TX100 | BU508A overheats, int line hold. | R143 6R8 value gone high to about 100R | 14-09-04 |
| Ferguson | TX100 | Buzz on sound | CF1off | 14-09-04 |
| Ferguson | TX100 | Buzz on sound in mute & at low volume | Replace TDA1701. | 14-09-04 |
| Ferguson | TX100 | Cast on colour. | C50 , C51 , C52 | 14-09-04 |
| Ferguson | TX100 | Chan display lit but no EHT | D2 on E/W vertical plug in pcb s/c | 14-09-04 |
| Ferguson | TX100 | Channel - 1&2 - 3&4 - 5&6 ect tune together. | IC342 ( pin 14 high all the time ) | 14-09-04 |
| Ferguson | TX100 | Channel 11 displayed when on channel 1. | D4 on stereo bar graph display brd revrse leaky. | 14-09-04 |
| Ferguson | TX100 | Channel change - & into standby intermittent. | Drys on TR901 regulator. | 14-09-04 |
| Ferguson | TX100 | Channels - all store the same. | TR2016 , 2017 , D2025 , R2070 , SAA5012 , M293 due to CRT flash. | 14-09-04 |