Make | Model | Problem | Solution | Date |
| | | |
Found: 1771
|
Ferguson | TX100 | Frame jitter - black lines on picture. | Check C95 , C97 ( 100nf ) , C98 for o/c or leaky. | 14-09-04 |
Ferguson | TX100 | Frame jitter - intermittent colour - no text. | IC1033 ( SAA5030 ) | 14-09-04 |
Ferguson | TX100 | Goes into chan search when afc removed | D2026-2029 1N4148 leaky | 14-09-04 |
Ferguson | TX100 | GOES OFF AFTER A FEW MINS. | CHOPPER TRANSFORMER | 14-09-04 |
Ferguson | TX100 | Green picture. | R601 ( 110k ) high. | 14-09-04 |
Ferguson | TX100 | Int chan change & int goes into st/by | Low volts (2V) at pin 20 IC901 of R/C proc (9v) reg tr901 dry joints | 14-09-04 |
Ferguson | TX100 | Int R/C | Ceramic reonator CR241 (500Hz) | 14-09-04 |
Ferguson | TX100 | Int sound | R95 2R2 dry joints | 14-09-04 |
Ferguson | TX100 | Int start up aft briefly sw off | Dry joints T1 | 14-09-04 |
Ferguson | TX100 | Intermittent corruption of the front panel display | Tube base arcing internally | 14-09-04 |
|
Ferguson | TX100 | INTERMITTENT SWITCH OFF | IC241 M494 ON REMOTE PANEL | 14-09-04 |
Ferguson | TX100 | Intermittent. | DJ on T1 pins 5&6. | 14-09-04 |
Ferguson | TX100 | Lack of width | LOPTx faulty | 14-09-04 |
Ferguson | TX100 | Lack of width (110 deg) | 90 deg parts fitted in error | 14-09-04 |
Ferguson | TX100 | LEDs all on - no sound or picture. | R1931 ( 47R ) on remote board. | 14-09-04 |
Ferguson | TX100 | Line - twitch. | Change C75 to 22u f , TR10. | 14-09-04 |
Ferguson | TX100 | Line o/p trs last only a short time | Check for dry joints at scan coil plug | 14-09-04 |
Ferguson | TX100 | Line speed error on parts of screen. | TR8. | 14-09-04 |
Ferguson | TX100 | Line tear from switch on for few mins. | C141 ( 10uf ) | 14-09-04 |
Ferguson | TX100 | Lines on picture ( black ) & frame jitter. | C97 ( 100nf ) o/c. | 14-09-04 |
Ferguson | TX100 | LOP transistor short lived - pic twitches | Line hold pot | 14-09-04 |
Ferguson | TX100 | Low contrast int | Check plug to CRT heaters | 14-09-04 |
Ferguson | TX100 | Mute LED on - sticking on channel 8. | DJ on R132 ( 4.7R ) | 14-09-04 |
Ferguson | TX100 | Mute LED on. | D116 s/c. | 14-09-04 |
Ferguson | TX100 | No AV on channels 8 & 9 , 1-7 ok. | Cut link A on pin 8 of IC1806 on remote panel. | 14-09-04 |
Ferguson | TX100 | No blue. | R609 ( 100k ) o/c. | 14-09-04 |
Ferguson | TX100 | No britness control or sound & frame collapse | IC8. | 14-09-04 |
Ferguson | TX100 | NO CHAN DISP OR TUNING | TR7 ZTX650 ( NO 9v TO REM PANEL ) | 14-09-04 |
Ferguson | TX100 | No channel change - intermittent. | IC2007 ( M293B1 ) | 14-09-04 |
Ferguson | TX100 | No colour | pin 5 col dec chip reads low & doesn't vary with sat, C47 2µ2 25v non pol cap faulty | 14-09-04 |