| Make | Model | Problem | Solution | Date |
| | | |
| Found: 4551
|
| Philips | 3D | Text does't function | Check U 1555 (digital PCB; 4822 212 22585)
| 14-09-04 |
| Philips | 3D | Tuner UV618/6456 | Tuner UV618/6456
----------------
The tuner UV618 (4822 210 10304) is no longer available.
For 3D sets please order 4822 210 10593.
| 14-09-04 |
| Philips | 3D | Tuning does not function | Check tuning voltage on pin 15 IC 7848.
Replace IC 7848 (MEA 2901/07; 4822 209 72127) U 1008
| 14-09-04 |
| Philips | 3D | Tuning unstable | Replace U 1018 (4822 212 22439)
| 14-09-04 |
| Philips | 3D | Voltage +140V is present | Replace TS7618 (2SD1577PH; 4822 130 43921)
| 14-09-04 |
| Philips | 3LC2050 (LCD) | No sound TV or radio | R120 10R sm res | 14-09-04 |
| Philips | 3LC2050 (LCD) | No TV sound | audio in at pin 13 IC71 µPC1416G sm chip but nothing out at pin 14 - chip faulty | 14-09-04 |
| Philips | 41GR884 Proj | Shuts down aft couple of secs | Prot cct on due to R3818 180k o/c on conv/prot board | 14-09-04 |
| Philips | 48UP91 | Picture is blurred and looks washed out | Check for dirty mirrors! | 14-09-04 |
| Philips | 4CM4270 Monitor | DEAD 190v RAIL LOW | CHANGE T5612 FIRST , BEFORE LOPT!! | 14-09-04 |
|
|
| Philips | 50p8341 | Phillips 60" TV 50p8341 I am having a problem with the volume it keeps going out. I have Air blown the inside (cirquits) but it did not help somedays there is no problem other days volume goes and comes | Replace SSB p#313912725871. (Small signal board.) New part #PH3912725871. They also sell a kit PH3912725871-KIT. Common problem. | 12-09-05 |
| Philips | 5240 | Rope effect on right hand side. | R3191 1kr o/c. | 14-09-04 |
| Philips | 52ZY3535 Anubis B AA | No pic, sound ok with faint burning smell | No Filed - replace overheated R3452 4R7, R3450 3R9 & IC7400 TDA3653B | 14-09-04 |
| Philips | 5GFL2.30E AA | Dead aft storm - led green for 40secs then red | FSS supply not working - fit FSS supply kit - includes module Pt no 4822 310 32214 | 14-09-04 |
| Philips | 6770 | STUCK IN STANDBY | REPLACE T7542 BC857C | 14-09-04 |
| Philips | 6776 | CHANNEL NUMBER STUCK ON DISPLAY | PRESS AND HOLD 1+ BUTTON UNDER FLAP | 14-09-04 |
| Philips | 9CM0 | Flickering. | Add PVC tape under multipole unit clamping ring on CRT. | 14-09-04 |
| Philips | A10 | Service mode entering | Enter 062596 then "Menu" | 14-09-04 |
| Philips | A10 28PW6305 | Child lock removal | press menu / features / child lock & turn off. If parental control has been activated (locking out certain chans or locking the set) then enter a pin. If not known then enter 0711 TWICE to gain access. You can then change no.or turn funct off. | 14-09-04 |
| Philips | A10 28PW6305 | No R/C - front controls ok | IR preamp rec, cct ref no.1002 on small sub panel at front of set. SEME part no. 9322 1275 4667 only 750mV P.P. at pin 3 of the panel with painter I.C. on, should have been 3.3V P.P | 14-09-04 |
| Philips | A10 28PW6305 | R/C inop | IR Rx pre-amp 1002 on sub panel front of set- part no. 9322 1275 4667 | 14-09-04 |
| Philips | A10 28PW6315/05 | Int locks up with no R/C response | IC7064 micro (painter) faulty - pin 76 R/C I/P stuck high | 14-09-04 |
| Philips | A10 28PW6515/05 | Reverts to st/by aft several hours until sw off at mains & re-started | IC7064 micro | 14-09-04 |
| Philips | A10 32PW6005 | Sound int or missing | Painter chip faulty - Remove mute function by linking E-C of T7701 (BC847B SMD) near the AN5277 on the underside | 14-09-04 |
| Philips | A10 32PW6305 | Vert lines floating behind pic - same on scart | Being generated in TDA9181 comb filter - TDA9181 replaced | 14-09-04 |
| Philips | A10 32PW6305/05 | No sigs but tunes ok - traced to small sigs panel | Check options code against label on crt | 14-09-04 |
| Philips | A10 chassis | Locks up after a few mins (no chan change etc) | Painter chip faulty | 14-09-04 |
| Philips | A10E 28/32PW6005 | Sound int or absent or sw to Ext1- esp when warm | IC7064 micro usually the cause (shuts down aud o/p chip) - phone amp still ok - pt no 3111 250 54511 | 14-09-04 |
| Philips | A10E 28PW6305 | Int sound due to muting pin 8 of aud o/p chip IC7702 AN5277 int going low | Traced back to IC7064 sm pin 98 on control board leaky to earth when faulty. To avoid replacing this 100 pin sm chip, s/c e-c of Tr 7701 sm BC847B (under main pcb near AN5277 o/p chip) | 14-09-04 |
| Philips | A10E 28PW6305 | No pic - poor pic lacking contrast when A1 advanced | No volts pin 10 LOPTx (beam lim) - Tr7408 BF423 on main pcb leaky | 14-09-04 |