| Make | Model | Problem | Solution | Date |
| | | |
| Found: 4551
|
| Philips | ANUBIS-S | Combination of Picture tube - Yoke - Multipole | Combination of Picture tube - Yoke - Multipole
----------------------------------------------
Only for 14" Anubis S AA and CC sets
For the 14" Anubis S AA and CC sets, depending on the production
date and the typenumber, 3 different tubes are used.
Every | 14-09-04 |
| Philips | ANUBIS-S | Correction | Correction
----------
Only for /77 (TRINORMA)
Tuner for /77 Anubis S sets is not published in spanish AA service
manual Anubis S 4822 727 19719.
Tuner UV936E/IEC 4822 210 10582
Please add to your service manuals
| 14-09-04 |
| Philips | ANUBIS-S | Correction on Service Information Anubis-S BB 94.0 | Correction on Service Information Anubis-S BB 94.03
---------------------------------------------------
For BB sets 25" and 29"
Diode 6521 is indicated in power supply diagram as BZX79-C4V7.
This should be:
- For 25" BZX79-B18 Service code 4822 130 31024 | 14-09-04 |
| Philips | ANUBIS-S | Correction Service Manual | Correction Service Manual
-------------------------
In Anubis S AA service manual in the spare parts list the
next parts are wrong:
- D6445 must be BYD34M (4822 130 83457)
- D6447 must be BYD34M (4822 130 83457)
Missing in the spare parts list is micropr | 14-09-04 |
| Philips | ANUBIS-S | Correction Service Manual | Correction Service Manual
-------------------------
For all versions:
In the service manual AA page 7 and in product survey 1993-2 all
sets with /58/62/75/79 are indicated to be "140 V only" mains
voltage sets. This is wrong as "140 V only" sets do not e | 14-09-04 |
| Philips | ANUBIS-S | Defocus of the teletext characters | It is recommended on the teletext panel (diagram N) to:
replace D6813 by a LLZ-C3V0 4822 130 80879
REMARKS :
Introduced in production week 9407
| 14-09-04 |
| Philips | ANUBIS-S | Distortion in BTSC sound | Replace R3824 by 18k (4822 051 20183)
Replace R3825 by 18k (4822 051 20183)
REMARKS :
Introduced in production week 9336
| 14-09-04 |
| Philips | ANUBIS-S | Distortion of sound | Replace C2102 by 4n7 (4822 126 12641)
Add R3130 56k (4822 116 52291)
Add R3136 39k (4822 020 23903)
at pin 1 of IC7225-6F audio part
REMARKS :
Introduced in production week 9331
| 14-09-04 |
| Philips | ANUBIS-S | Double image (only for 54/71/77/85/87 sets) | Delete C2286, C2287 and C2288 at the outputs of the video
controller IC7225-6D
REMARKS :
Introduced in production week 9333
| 14-09-04 |
| Philips | ANUBIS-S | Failure of TS7513 for 21" ANUBIS-S BB /93 | In order to reduce the voltage accross the drain source of TS7513
it is recommended to:
Replace R3526 by 47k 5% 4822 053 11473
Place 2 beads (4822 526 10609) between anode D6530 and D6531 (at
the secondary side of the power supply) and the PWB at the c | 14-09-04 |
|
|
| Philips | ANUBIS-S | Failure of TS7513 for 21" ANUBIS-S BB /93 | In order to reduce the voltage accross the drain source of TS7513
it is recommended to:
Replace R3526 by 47k 5% 4822 053 11473
Place 2 beads (4822 526 10609) between anode D6530 and D6531 (at
the secondary side of the power supply) and the PWB at the c | 14-09-04 |
| Philips | ANUBIS-S | Failure on Line Output Transistor TS7445 | In case of a failure on the Line Output Transistor TS7445 in
Anubis S CC, it is recommended to adapt the circuitry as follows
(see diagram A page 7 service manual Anubis S CC)
(GB 4822 727 20288 and ES 4822 727 20289)
* Delete Scan Protection Panel
* Cha | 14-09-04 |
| Philips | ANUBIS-S | Failure on Line Output Transistor TS7445 (2SC379X) | In case of failure of the Line Output Transistor TS7445, it is
recommended to adapt the circuitry as follows:
For 14" Anubis S AA sets:
* change TS7445 into BU1508DX (4822 130 63569)
* delete R3445
* change R3444 into 4k7 5% | 14-09-04 |
| Philips | ANUBIS-S | For all ANUBIS-S AA (PV2) sets
Failure of IC7400 | For all ANUBIS-S AA (PV2) sets
Failure of IC7400 frame deflection after protection
---------------------------------------------------
If IC7400 is damaged after an activation of the internal protection
circuitry inside IC7400 it is recommended to:
Add | 14-09-04 |
| Philips | ANUBIS-S | Geometrical distortion at teletext reception | In case of some degree of distortion at teletext reception,
it is recommended to:
change R3828 to 1k 5% 0.25W SMD 4822 051 10102
REMARKS :
Sensitivity of the horizontal deflection can be effected by
different beam current, especially a | 14-09-04 |
| Philips | ANUBIS-S | Horizontal flashing lines across picture in VHF 1 at certain volume | At the stereo playback panel (diagram G Anubis S AA manual
4822 727 19707 in GB and 4822 727 19719 in E) it is recommended to:
Add 2n2 10% 50V (4822 122 33531) at junction 2893/3891
and pin 2 S18
Add 2n2 10% 50V (4822 | 14-09-04 |
| Philips | ANUBIS-S | How to activate "Hotel mode" | Applicable for family: VST sets
For AA/BB/CC sets
Identification on uP:
Hotel mode can only be activated if the software for hotel mode
is available (so an "H" version) and when the hotel mode option
(address 246) is enabled. Two hotel modes are possible | 14-09-04 |
| Philips | ANUBIS-S | How to activate "Hotel mode" | Applicable for family: PLL sets
For AA/BB/CC sets
Identification on uP:
Hotel mode can only be activated if the software for hotel mode
is available (so an "H" version) and when the hotel mode option
(address 246) is enabled. Only one hotel modes is poss | 14-09-04 |
| Philips | ANUBIS-S | How to activate "Hotel mode" | Applicable for family: VST sets
For DD sets
Identification on uP:
Hotel mode can only be activated if the software for hotel mode
is available (so an "H" version) and when the hotel mode option
(address 246) is enabled. Two hotel modes are possible:
Hot | 14-09-04 |
| Philips | ANUBIS-S | How to activate "Hotel mode" | Applicable for family: PLL sets
For DD sets
Identification on uP:
Hotel mode can only be activated if the software for hotel mode
is available (so an "H" version) and when the hotel mode option
(address 246) is enabled. Only 1 hotel mode is possible:
Ho | 14-09-04 |
| Philips | ANUBIS-S | How to de-activate "Hotel mode" | Applicable for family: VST sets
For AA/BB/CC sets
Identification on uP:
Hotel mode can only be de-activated if the software for hotel
mode is available (so an "H" version) and when the hotel mode
option (address 246) is enabled. Two hotel modes are possi | 14-09-04 |
| Philips | ANUBIS-S | How to de-activate "Hotel mode" | Applicable for family: PLL sets
For AA/BB/CC sets
Identification on uP:
Hotel mode can only be de-activated if the software for hotel
mode is available (so an "H" version) and when the hotel mode
option (address 246) is enabled. Only one hotel modes is
p | 14-09-04 |
| Philips | ANUBIS-S | How to de-activate "Hotel mode" | Applicable for family: VST sets
For DD sets
Identification on uP:
Hotel mode can only be de-activated if the software for hotel
mode is available (so an "H" version) and when the hotel mode
option (address 246) is enabled. Two hotel modes are possible:
| 14-09-04 |
| Philips | ANUBIS-S | How to de-activate "Hotel mode" | Applicable for family: PLL sets
For DD sets
Identification on uP:
Hotel mode can only be de-activated if the software for hotel
mode is available (so an "H" version) and when the hotel mode
option (address 246) is enabled. Only 1 hotel mode is possible:
| 14-09-04 |
| Philips | ANUBIS-S | IC7225 does not start up. | Solder 3 x BAT85 (4822 130 31983) on copper side of the main
carrier.
Cathode pin 41 IC7225 anode ground
Cathode pin 43 IC7225 anode ground
Cathode pin 36 IC7225 anode ground
Make bare ends as short as possible and isolate with a sleeve
REMARKS | 14-09-04 |
| Philips | ANUBIS-S | INSTALL or STORE not possible; sound volume might be too low | Check whether "Hotel Mode" is disabled. To check this, see "Frequently Asked Questions", "How to de-activate "Hotel Mode". | 14-09-04 |
| Philips | ANUBIS-S | Interference in Band I | a. For all 14" sets and 20"/75/79 and 21"/75/79 sets replace uP
IC7600 by PCA84C844P/110 (4822 209 32927)
b. For all 14-20-21" sets add bead (4822 526 10606) between anode
of D6530 and D6531 (at the secondary side of the FFS
transfor | 14-09-04 |
| Philips | ANUBIS-S | Line output failure | Check line transistor TS7445 (4822 130 60851)
If TS7445 defective, by then also replace
C2445 by 680 pF 2kV 4822 126 12269
C2446 by 5n6 2kV 4822 121 70355
C2447 by 680 pF 2kV 4822 126 12269
REMARKS :
Introduced in production week 9323
| 14-09-04 |
| Philips | ANUBIS-S | Line output transformer 4822 140 10486 is no longe | Line output transformer 4822 140 10486 is no longer available
-------------------------------------------------------------
Only for 21" Anubis S BB/14" Anubis S CC
LOT 4822 140 10557 can be used as a substitute.
However C2450 has to be changed from 560n | 14-09-04 |
| Philips | ANUBIS-S | Lock-up problem during program change; error message 6 & 7 on screen | Change R3198 into 560E - 4822 051 10561
REMARKS :
Problem behaviour:
After pressing first digit, first digit appear on the screen.
No further digit can be inserted. The program will stay as previous
selected. The digit will disappear after 30-45 | 14-09-04 |