| Make | Model | Problem | Solution | Date |
| | | |
| Found: 4551
|
| Philips | CP110 | Dead - fuse intact | Has high drive amplitude briefly at Chopper Tr at sw on - BUT11 chopper Tr o/c b-e | 14-09-04 |
| Philips | CP110 | Dead - fuse ok 300v on collector BUT11. | BUT11 o/c base to emitter. | 14-09-04 |
| Philips | CP110 | Dead - mains fuse shattered | Check mains bridge rects & 150µ 385v mains smoother for shorts | 14-09-04 |
| Philips | CP110 | Dead - no st/by led | 22R safety res 3655 o/c | 14-09-04 |
| Philips | CP110 | Dead - tripping chan light pulsing | loptx shorted turns 1-17 | 14-09-04 |
| Philips | CP110 | Dead - volts o/p from bridge rect low at 190v | C2656 150µ low cap | 14-09-04 |
| Philips | CP110 | DEAD , 300v AT BUT11AF COLL. LOW START VOLTS AT PIN | C2656 OC. | 14-09-04 |
| Philips | CP110 | DEAD BUT11AF OK + FUSE OK TEA1039 PIN 2 AT 2v ( NO | REPLACE TEA1039 | 14-09-04 |
| Philips | CP110 | Dead intermittently | 140v HT high at 156v - no line drive, Tr7630 BC337 line dr tr int o/c; dry joints Tr7665 chopper tr coll | 14-09-04 |
| Philips | CP110 | DEAD NO 11v PIN 9 TEA1039 ( ONLY IN START UP ) | C2656 150uF OR C2661 2200uF | 14-09-04 |
|
|
| Philips | CP110 | Dead or lines in the upper part of the screen. | C2656 (150uF 385V; 4822 124 42029) open circuit.
| 14-09-04 |
| Philips | CP110 | Dead Pri HT low at 190v | Res cap C2656 150µ low cap | 14-09-04 |
| Philips | CP110 | DEAD WITH " F1" IN DISPLAY ( " F1 " MEANS 12v SUPP | T7739 LEAKY | 14-09-04 |
| Philips | CP110 | Dead with "F1" in display | Indicates 12v supply missing - Tr7739 in st/by cct leaky | 14-09-04 |
| Philips | CP110 | Dead with F1 in display - 145v HT present | Dry joint D6668 (15 & 12v supplies) | 14-09-04 |
| Philips | CP110 | Dead, no start voltage to IC7669 pin 9 | Check C2656 (150uF 385V; 4822 124 42029), for open circuit.
| 14-09-04 |
| Philips | CP110 | Display reverts to "F1" aft few secs aft sw on | Tr7739 BC548 s/c | 14-09-04 |
| Philips | CP110 | DISTORTED VERTICALS | C2633 100uF | 14-09-04 |
| Philips | CP110 | East West bowing | R3599 ( 47R ) on CRT base & check Tr7600 & C2613 ( 390nF ) | 14-09-04 |
| Philips | CP110 | E-W faulty | R3599 47R 1/8w metal oxide o/c on crt base - check C2613 390nF o/c | 14-09-04 |
| Philips | CP110 | F1653 o/c | Later set have over volt sub panel if set has this and fuse blown replace CNX62 opto | 14-09-04 |
| Philips | CP110 | F1653 o/c | Later set have over volt sub panel if set has this and fuse blown replace CNX62 opto | 14-09-04 |
| Philips | CP110 | Field - bottom half of pic missing | R3570 8k2 in FOP stage o/c | 14-09-04 |
| Philips | CP110 | Field collapse | Tr7572 & Tr7573 s/c R3568 & R3571 o/c | 14-09-04 |
| Philips | CP110 | Field collapse | dry joints 12v reg | 14-09-04 |
| Philips | CP110 | Field collapse | Open circuit R3574 120k.
| 14-09-04 |
| Philips | CP110 | field cramping | D/J on L5663 or C2574 ( 680uF ) | 14-09-04 |
| Philips | CP110 | Field foldover | C2574 | 14-09-04 |
| Philips | CP110 | Function knobs on CTV fail | Check keyboard or Replace IC 7840 (TMP47C432AP-8188; 4822 310 31849) or (TMP47C432AP-8189: 4822 310 31851).
Important: mount the metal shielding with earth to R 3276 | 14-09-04 |
| Philips | CP110 | Fuse 1653 blowing. | Check IC7670 - CNX82A; 4822 130 10025
IC7675 - 12 volt regulator;2822 209 81726
Overvoltage panel 1005; 4822 212 23099 | 14-09-04 |